svg2gcode_grbl

olaf/svg2gcode_grbl

0 Fork 0

T

arcadeperfect 47915da7cb tweaked config

2020-01-01 16:47:04 -05:00

gcode

seems to work with example.svg

2019-12-31 16:14:07 -05:00

svg

seems to work with example.svg

2019-12-31 16:14:07 -05:00

venv

seems to work with example.svg

2019-12-31 16:14:07 -05:00

__init__.py

Initial commit

2013-11-30 15:31:16 -05:00

bezmisc.py

seems to work with example.svg

2019-12-31 16:14:07 -05:00

bezmisc.py.bak

seems to work with example.svg

2019-12-31 16:14:07 -05:00

config.py

tweaked config

2020-01-01 16:46:51 -05:00

convert.py

added cli

2020-01-01 16:00:55 -05:00

cspsubdiv.py

ran 2to3

2019-12-31 13:07:03 -05:00

cspsubdiv.py.bak

seems to work with example.svg

2019-12-31 16:14:07 -05:00

cubicsuperpath.py

added cli

2020-01-01 16:00:55 -05:00

cubicsuperpath.py.bak

seems to work with example.svg

2019-12-31 16:14:07 -05:00

example.svg

added cli

2020-01-01 16:00:55 -05:00

ffgeom.py

Initial commit

2013-11-30 15:31:16 -05:00

header.txt

added cli

2020-01-01 16:00:55 -05:00

LICENSE

Added license

2013-11-30 15:33:23 -05:00

README.md

tweaked config

2020-01-01 16:47:04 -05:00

shapes.py

seems to work with example.svg

2019-12-31 16:14:07 -05:00

shapes.py.bak

seems to work with example.svg

2019-12-31 16:14:07 -05:00

simplepath.py

seems to work with example.svg

2019-12-31 16:14:07 -05:00

simplepath.py.bak

seems to work with example.svg

2019-12-31 16:14:07 -05:00

simpletransform.py

seems to work with example.svg

2019-12-31 16:14:07 -05:00

simpletransform.py.bak

seems to work with example.svg

2019-12-31 16:14:07 -05:00

svg2gcode.py

added cli

2020-01-01 16:36:00 -05:00

svg2gcode.py.bak

seems to work with example.svg

2019-12-31 16:14:07 -05:00

temp.gcode

added cli

2020-01-01 16:00:55 -05:00

test.py

seems to work with example.svg

2019-12-31 16:14:07 -05:00

README.md

Forked from vishpat/svg2gcode

https://github.com/vishpat/svg2gcode

Modified to generate gcode for GRBL based pen plotter

Usage as cli:

python convert.py source.svg destination.gcode

There are various settings you can change in config.py. Most notably, you must set an upper and lower position for the z axis.

zTravel is the height it will move to before traveling to the next stroke

zDraw should be the height at which the pen will make contact with the paper