Trying to use brew-nix - still to much broken

README.md

@@ -1,9 +1,12 @@
-# A macOS nix-darwin config
+# A NIX Config To Rule Them all
+_now mostly focused on my Mac Machines_
 
-This repository now focuses on macOS systems managed with nix-darwin.
+Started with a configuration generated from [this nixos config template](https://github.com/dustinlyons/nixos-config/)
 
+Installed nix with `--nix-build-group-id 30000`
 
-Started with a configuration generated from [this nixos config template](https://github.com/dustinlyons/nixos-config/)Installed nix with `--nix-build-group-id 30000`
 Initialy created 'with secrets' but stripped out the git/agenix in favor of sops
 
-Refactored the configuration to remove nixos but keep the shared modules and Darwin host setup, with no NixOS trees or Linux app targets.
+```
+mkdir -p nixos-config && cd nixos-config && nix flake --extra-experimental-features 'nix-command flakes' init -t github:dustinlyons/nixos-config#starter-with-secrets
+```

apps/aarch64-darwin/apply

@@ -35,11 +35,27 @@ _prompt() {
   read -r $variable
 }
 
+ask_for_star() {
+  _print "${YELLOW}Would you like to support my work by starring my GitHub repo? yes/no [yes]: ${NC}"
+  local response
+  read -r response
+  response=${response:-yes} # Set default response to 'yes' if input is empty
+  if [[ "$response" =~ ^[Yy](es)?$ ]] || [[ -z "$response" ]]; then
+    if [[ "$OS" == "Darwin" ]]; then
+      open "https://github.com/dustinlyons/nixos-config"
+    else
+      xdg-open "https://github.com/dustinlyons/nixos-config"
+    fi
+  fi
+}
+
+ask_for_star
+
 # Fetch username from the system
 export USERNAME=$(whoami)
 
-# If the username is 'root', ask the user for their username
+# If the username is 'nixos' or 'root', ask the user for their username
-if [[ "$USERNAME" == "root" ]]; then
+if [[ "$USERNAME" == "nixos" ]] || [[ "$USERNAME" == "root" ]]; then
   _prompt "${YELLOW}You're running as $USERNAME. Please enter your desired username: ${NC}" USERNAME
 fi
 
@@ -85,11 +101,24 @@ select_boot_disk() {
   fi
 }
 
+# Set hostname and find primary disk if this is NixOS
+if [[ "$OS" != "Darwin" ]]; then
+  _prompt "${YELLOW}Please enter a hostname for the system: ${NC}" HOST_NAME
+  export HOST_NAME
+  select_boot_disk
+fi
+
 confirm_details() {
   _print "${GREEN}Username: $USERNAME"
   _print "Email: $GIT_EMAIL"
   _print "Name: $GIT_NAME${NC}"
 
+  if([[ "$OS" != "Darwin" ]]); then
+    _print "${GREEN}Primary interface: $PRIMARY_IFACE"
+    _print "Boot disk: $BOOT_DISK"
+    _print "Hostname: $HOST_NAME${NC}"
+  fi
+
   _prompt "${YELLOW}Is this correct? yes/no: ${NC}" choice
 
   case "$choice" in

apps/aarch64-linux

@@ -0,0 +1 @@
+x86_64-linux

apps/x86_64-darwin/apply

@@ -35,11 +35,27 @@ _prompt() {
   read -r $variable
 }
 
+ask_for_star() {
+  _print "${YELLOW}Would you like to support my work by starring my GitHub repo? yes/no [yes]: ${NC}"
+  local response
+  read -r response
+  response=${response:-yes} # Set default response to 'yes' if input is empty
+  if [[ "$response" =~ ^[Yy](es)?$ ]] || [[ -z "$response" ]]; then
+    if [[ "$OS" == "Darwin" ]]; then
+      open "https://github.com/dustinlyons/nixos-config"
+    else
+      xdg-open "https://github.com/dustinlyons/nixos-config"
+    fi
+  fi
+}
+
+ask_for_star
+
 # Fetch username from the system
 export USERNAME=$(whoami)
 
-# If the username is 'root', ask the user for their username
+# If the username is 'nixos' or 'root', ask the user for their username
-if [[ "$USERNAME" == "root" ]]; then
+if [[ "$USERNAME" == "nixos" ]] || [[ "$USERNAME" == "root" ]]; then
   _prompt "${YELLOW}You're running as $USERNAME. Please enter your desired username: ${NC}" USERNAME
 fi
 
@@ -85,11 +101,24 @@ select_boot_disk() {
   fi
 }
 
+# Set hostname and find primary disk if this is NixOS
+if [[ "$OS" != "Darwin" ]]; then
+  _prompt "${YELLOW}Please enter a hostname for the system: ${NC}" HOST_NAME
+  export HOST_NAME
+  select_boot_disk
+fi
+
 confirm_details() {
   _print "${GREEN}Username: $USERNAME"
   _print "Email: $GIT_EMAIL"
   _print "Name: $GIT_NAME${NC}"
 
+  if([[ "$OS" != "Darwin" ]]); then
+    _print "${GREEN}Primary interface: $PRIMARY_IFACE"
+    _print "Boot disk: $BOOT_DISK"
+    _print "Hostname: $HOST_NAME${NC}"
+  fi
+
   _prompt "${YELLOW}Is this correct? yes/no: ${NC}" choice
 
   case "$choice" in

apps/x86_64-linux/apply

@@ -0,0 +1,169 @@
+#!/usr/bin/env bash
+
+VERSION=1.0
+
+# Color codes
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+NC='\033[0m' # No Color
+
+# Determine the operating system
+export OS=$(uname)
+
+# Primary network interface
+if [[ "$OS" != "Darwin" ]]; then
+  export PRIMARY_IFACE=$(ip -o -4 route show to default | awk '{print $5}')
+  echo -e "${GREEN}Found primary network interface $PRIMARY_IFACE${NC}"
+fi
+
+# Custom print function
+_print() {
+  if [[ "$OS" == "Darwin" ]]; then
+    echo -e "$1"
+  else
+    echo "$1"
+  fi
+}
+
+# Custom prompt function
+_prompt() {
+  local message="$1"
+  local variable="$2"
+
+  _print "$message"
+  read -r $variable
+}
+
+ask_for_star() {
+  _print "${YELLOW}Would you like to support my work by starring my GitHub repo? yes/no [yes]: ${NC}"
+  local response
+  read -r response
+  response=${response:-yes} # Set default response to 'yes' if input is empty
+  if [[ "$response" =~ ^[Yy](es)?$ ]] || [[ -z "$response" ]]; then
+    if [[ "$OS" == "Darwin" ]]; then
+      open "https://github.com/dustinlyons/nixos-config"
+    else
+      xdg-open "https://github.com/dustinlyons/nixos-config"
+    fi
+  fi
+}
+
+ask_for_star
+
+# Fetch username from the system
+export USERNAME=$(whoami)
+
+# If the username is 'nixos' or 'root', ask the user for their username
+if [[ "$USERNAME" == "nixos" ]] || [[ "$USERNAME" == "root" ]]; then
+  _prompt "${YELLOW}You're running as $USERNAME. Please enter your desired username: ${NC}" USERNAME
+fi
+
+# Check if git is available
+if command -v git >/dev/null 2>&1; then
+  # Fetch email and name from git config
+  export GIT_EMAIL=$(git config --get user.email)
+  export GIT_NAME=$(git config --get user.name)
+else
+  _print "${RED}Git is not available on this system.${NC}"
+fi
+
+# If git email is not found or git is not available, ask the user
+if [[ -z "$GIT_EMAIL" ]]; then
+  _prompt "${YELLOW}Please enter your email: ${NC}" GIT_EMAIL
+fi
+
+# If git name is not found or git is not available, ask the user
+if [[ -z "$GIT_NAME" ]]; then
+  _prompt "${YELLOW}Please enter your name: ${NC}" GIT_NAME
+fi
+
+select_boot_disk() {
+  local disks
+  local _boot_disk
+
+  _print "${YELLOW}Available disks:${NC}"
+  disks=$(lsblk -nd --output NAME,SIZE | grep -v loop)
+  echo "$disks"
+
+  # Warning message for data deletion
+  _print "${RED}WARNING: All data on the chosen disk will be erased during the installation!${NC}"
+  _prompt "${YELLOW}Please enter the name of your boot disk (e.g., sda, nvme0n1). Do not include the full path ("/dev/"): ${NC}" _boot_disk
+
+  # Confirmation for disk selection to prevent accidental data loss
+  _print "${YELLOW}You have selected $_boot_disk as the boot disk. This will delete everything on this disk. Are you sure? (Y/N): ${NC}"
+  read -r confirmation
+  if [[ "$confirmation" =~ ^[Yy]$ ]]; then
+    export BOOT_DISK=$_boot_disk
+  else
+    _print "${RED}Disk selection cancelled by the user. Please run the script again to select the correct disk.${NC}"
+    exit 1
+  fi
+}
+
+# Set hostname and find primary disk if this is NixOS
+if [[ "$OS" != "Darwin" ]]; then
+  _prompt "${YELLOW}Please enter a hostname for the system: ${NC}" HOST_NAME
+  export HOST_NAME
+  select_boot_disk
+fi
+
+# Confirmation step
+confirm_details() {
+  _print "${GREEN}Username: $USERNAME"
+  _print "Email: $GIT_EMAIL"
+  _print "Name: $GIT_NAME${NC}"
+
+  if([[ "$OS" != "Darwin" ]]); then
+    _print "${GREEN}Primary interface: $PRIMARY_IFACE"
+    _print "Boot disk: $BOOT_DISK"
+    _print "Hostname: $HOST_NAME${NC}"
+  fi
+
+  _prompt "${YELLOW}Is this correct? yes/no: ${NC}" choice
+
+  case "$choice" in
+    [Nn] | [Nn][Oo] ) 
+      _print "${RED}Exiting script.${NC}" 
+      exit 1
+      ;;
+    [Yy] | [Yy][Ee][Ss] ) 
+      _print "${GREEN}Continuing...${NC}"
+      ;;
+    * ) 
+      _print "${RED}Invalid option. Exiting script.${NC}" 
+      exit 1
+      ;;
+  esac
+}
+
+# Call the confirmation function
+confirm_details
+
+# Function to replace tokens in each file
+replace_tokens() {
+  local file="$1"
+  if [[ $(basename $1) != "apply" ]]; then
+    if [[ "$OS" == "Darwin" ]]; then
+      # macOS
+      LC_ALL=C LANG=C sed -i '' -e "s/%USER%/$USERNAME/g" "$file"
+      LC_ALL=C LANG=C sed -i '' -e "s/%EMAIL%/$GIT_EMAIL/g" "$file"
+      LC_ALL=C LANG=C sed -i '' -e "s/%NAME%/$GIT_NAME/g" "$file"
+    else
+      # Linux or other
+      sed -i -e "s/%USER%/$USERNAME/g" "$file"
+      sed -i -e "s/%EMAIL%/$GIT_EMAIL/g" "$file"
+      sed -i -e "s/%NAME%/$GIT_NAME/g" "$file"
+      sed -i -e "s/%INTERFACE%/$PRIMARY_IFACE/g" "$file"
+      sed -i -e "s/%DISK%/$BOOT_DISK/g" "$file"
+      sed -i -e "s/%HOST%/$HOST_NAME/g" "$file"
+    fi
+  fi
+}
+
+# Traverse directories and call replace_tokens on each Nix file
+export -f replace_tokens
+find . -type f -exec bash -c 'replace_tokens "$0"' {} \;
+
+echo "$USERNAME" > /tmp/username.txt
+_print "${GREEN}User $USERNAME information applied.${NC}"

apps/x86_64-linux/build-switch

@@ -0,0 +1,30 @@
+#!/bin/sh -e
+
+VERSION=1.0
+
+GREEN='\033[1;32m'
+RED='\033[1;31m'
+YELLOW='\033[1;33m'
+NC='\033[0m'
+
+SYSTEM=$(uname -m)
+
+case "$SYSTEM" in
+  x86_64)
+    FLAKE_TARGET="x86_64-linux"
+    ;;
+  aarch64)
+    FLAKE_TARGET="aarch64-linux"
+    ;;
+  *)
+    echo -e "${RED}Unsupported architecture: $SYSTEM${NC}"
+    exit 1
+    ;;
+esac
+
+echo -e "${YELLOW}Starting...${NC}"
+
+# We pass SSH from user to root so root can download secrets from our private Github
+sudo SSH_AUTH_SOCK=$SSH_AUTH_SOCK /run/current-system/sw/bin/nixos-rebuild switch --flake .#$FLAKE_TARGET $@
+
+echo -e "${GREEN}Switch to new generation complete!${NC}"

flake.nix

@@ -1,5 +1,5 @@
 {
-  description = "Starter configuration for macOS with nix-darwin";
+  description = "Starter Configuration with secrets (removed) for MacOS and NixOS";
   inputs = {
     nixpkgs = {
       url = "github:nixos/nixpkgs//nixpkgs-26.05-darwin";
@@ -36,6 +36,10 @@
       url = "github:homebrew/homebrew-cask";
       flake = false;
     };
+    disko = {
+      url = "github:nix-community/disko";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
     sops-nix = {
       url = "github:Mic92/sops-nix";
       inputs.nixpkgs.follows = "nixpkgs";
@@ -49,6 +53,14 @@
     llm-agents = {
       url = "github:numtide/llm-agents.nix";
     };
+   brew-api = {
+      url = "github:BatteredBunny/brew-api";
+      flake = false;
+    };
+    brew-nix = {
+      url = "github:BatteredBunny/brew-nix";
+      inputs.brew-api.follows = "brew-api";
+    };
 
     # mac-app-util doesn't work with OCLP installed on X86
     # mac-app-util = {
@@ -65,20 +77,27 @@
       homebrew-cask,
       home-manager,
       nixpkgs,
+      disko,
       nixd,
       sops-nix,
       nix-vscode-extensions,
       catppuccin,
       llm-agents,
+      brew-api,
+      brew-nix,
       ...
     }@inputs:
     let
       user = "olaf";
+      linuxSystems = [
+        "x86_64-linux"
+        "aarch64-linux"
+      ];
       darwinSystems = [
         "aarch64-darwin"
         "x86_64-darwin"
       ];
-      forAllSystems = f: nixpkgs.lib.genAttrs darwinSystems f;
+      forAllSystems = f: nixpkgs.lib.genAttrs (linuxSystems ++ darwinSystems) f;
       devShell =
         system:
         let
@@ -96,7 +115,7 @@
                 export EDITOR=vim
               '';
               buildInputs = with pkgs; [
-                rnix-lsp
+                bash
               ];
             };
         };
@@ -112,6 +131,11 @@
           '')
         }/bin/${scriptName}";
       };
+      mkLinuxApps = system: {
+        "apply" = mkApp "apply" system;
+        "build-switch" = mkApp "build-switch" system;
+        "install" = mkApp "install" system;
+      };
       mkDarwinApps = system: {
         "apply" = mkApp "apply" system;
         "build" = mkApp "build" system;
@@ -120,7 +144,7 @@
       };
     in
     {
-      devShells = forAllSystems devShell;
+      devShells = nixpkgs.lib.genAttrs darwinSystems devShell;
       apps = nixpkgs.lib.genAttrs darwinSystems mkDarwinApps;
 
       darwinConfigurations = nixpkgs.lib.genAttrs darwinSystems (
@@ -129,21 +153,12 @@
           inherit system;
           specialArgs = inputs;
           modules = [
+            brew-nix.darwinModules.default
+            #    sops-nix.nixosModules.sops
             home-manager.darwinModules.home-manager
-            nix-homebrew.darwinModules.nix-homebrew
             # mac-app-util.darwinModules.default
             {
-              nix-homebrew = {
+              brew-nix.enable = true;
-                inherit user;
-                enable = true;
-                taps = {
-                  "homebrew/homebrew-core" = homebrew-core;
-                  "homebrew/homebrew-cask" = homebrew-cask;
-                  "homebrew/homebrew-bundle" = homebrew-bundle;
-                };
-                mutableTaps = false;
-                autoMigrate = true;
-              };
               home-manager.sharedModules = [
                 #                mac-app-util.homeManagerModules.default
                 catppuccin.homeModules.catppuccin
@@ -154,5 +169,7 @@
           ];
         }
       );
+
+      nixosConfigurations = { };
     };
 }

hosts/nixos/default.nix

@@ -0,0 +1,357 @@
+{
+  config,
+  inputs,
+  pkgs,
+  ...
+}:
+
+let
+  user = "olaf";
+  keys = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIOk8iAnIaa1deoc7jw8YACPNVka1ZFJxhnU4G74TmS+p" ];
+in
+{
+  imports = [
+    ../../modules/nixos/disk-config.nix
+    ../../modules/shared
+  ];
+
+  # Use the systemd-boot EFI boot loader.
+  boot = {
+    loader = {
+      systemd-boot = {
+        enable = true;
+        configurationLimit = 42;
+      };
+      efi.canTouchEfiVariables = true;
+    };
+    initrd.availableKernelModules = [
+      "xhci_pci"
+      "ahci"
+      "nvme"
+      "usbhid"
+      "usb_storage"
+      "sd_mod"
+    ];
+    # Uncomment for AMD GPU
+    # initrd.kernelModules = [ "amdgpu" ];
+    kernelPackages = pkgs.linuxPackages_latest;
+    kernelModules = [ "uinput" ];
+  };
+
+  # Set your time zone.
+  time.timeZone = "America/New_York";
+
+  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
+  # Per-interface useDHCP will be mandatory in the future, so this generated config
+  # replicates the default behaviour.
+  networking = {
+    hostName = "%HOST%"; # Define your hostname.
+    useDHCP = false;
+    interfaces."%INTERFACE%".useDHCP = true;
+  };
+
+  nix = {
+    nixPath = [ "nixos-config=/home/${user}/.local/share/src/nixos-config:/etc/nixos" ];
+    settings = {
+      allowed-users = [ "${user}" ];
+      trusted-users = [
+        "@admin"
+        "${user}"
+      ];
+      substituters = [
+        "https://nix-community.cachix.org"
+        "https://cache.nixos.org"
+      ];
+      trusted-public-keys = [ "cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY="
+       "nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs=" ];
+    };
+
+    package = pkgs.nix;
+    extraOptions = ''
+      experimental-features = nix-command flakes
+    '';
+  };
+
+  # Manages keys and such
+  programs = {
+    gnupg.agent.enable = true;
+
+    # Needed for anything GTK related
+    dconf.enable = true;
+
+    # My shell
+    zsh.enable = true;
+  };
+
+  services = {
+    displayManager.defaultSession = "none+bspwm";
+    xserver = {
+      enable = true;
+
+      # Uncomment these for AMD or Nvidia GPU
+      # videoDrivers = [ "amdgpu" ];
+      # videoDrivers = [ "nvidia" ];
+
+      # Uncomment this for Nvidia GPU
+      # This helps fix tearing of windows for Nvidia cards
+      # services.xserver.screenSection = ''
+      #   Option       "metamodes" "nvidia-auto-select +0+0 {ForceFullCompositionPipeline=On}"
+      #   Option       "AllowIndirectGLXProtocol" "off"
+      #   Option       "TripleBuffer" "on"
+      # '';
+
+      # LightDM Display Manager
+      displayManager.lightdm = {
+        enable = true;
+        greeters.slick.enable = true;
+        background = ../../modules/nixos/config/login-wallpaper.png;
+      };
+
+      # Tiling window manager
+      windowManager.bspwm = {
+        enable = true;
+      };
+
+      xkb = {
+        # Turn Caps Lock into Ctrl
+        layout = "us";
+        options = "ctrl:nocaps";
+      };
+    };
+
+    # Better support for general peripherals
+    libinput.enable = true;
+
+    # Let's be able to SSH into this machine
+    openssh.enable = true;
+
+    # Sync state between machines
+    # Sync state between machines
+    syncthing = {
+      enable = true;
+      openDefaultPorts = true;
+      dataDir = "/home/${user}/.local/share/syncthing";
+      configDir = "/home/${user}/.config/syncthing";
+      user = "${user}";
+      group = "users";
+      guiAddress = "127.0.0.1:8384";
+      overrideFolders = true;
+      overrideDevices = true;
+
+      settings = {
+        devices = { };
+        options.globalAnnounceEnabled = false; # Only sync on LAN
+      };
+    };
+
+    # Picom, my window compositor with fancy effects
+    #
+    # Notes on writing exclude rules:
+    #
+    #   class_g looks up index 1 in WM_CLASS value for an application
+    #   class_i looks up index 0
+    #
+    #   To find the value for a specific application, use `xprop` at the
+    #   terminal and then click on a window of the application in question
+    #
+    picom = {
+      enable = true;
+      settings = {
+        animations = true;
+        animation-stiffness = 300.0;
+        animation-dampening = 35.0;
+        animation-clamping = false;
+        animation-mass = 1;
+        animation-for-workspace-switch-in = "auto";
+        animation-for-workspace-switch-out = "auto";
+        animation-for-open-window = "slide-down";
+        animation-for-menu-window = "none";
+        animation-for-transient-window = "slide-down";
+        corner-radius = 12;
+        rounded-corners-exclude = [
+          "class_i = 'polybar'"
+          "class_g = 'i3lock'"
+        ];
+        round-borders = 3;
+        round-borders-exclude = [ ];
+        round-borders-rule = [ ];
+        shadow = true;
+        shadow-radius = 8;
+        shadow-opacity = 0.4;
+        shadow-offset-x = -8;
+        shadow-offset-y = -8;
+        fading = false;
+        inactive-opacity = 0.8;
+        frame-opacity = 0.7;
+        inactive-opacity-override = false;
+        active-opacity = 1.0;
+        focus-exclude = [
+        ];
+
+        opacity-rule = [
+          "100:class_g = 'i3lock'"
+          "60:class_g = 'Dunst'"
+          "100:class_g = 'Alacritty' && focused"
+          "90:class_g = 'Alacritty' && !focused"
+        ];
+
+        blur-kern = "3x3box";
+        blur = {
+          method = "kernel";
+          strength = 8;
+          background = false;
+          background-frame = false;
+          background-fixed = false;
+          kern = "3x3box";
+        };
+
+        shadow-exclude = [
+          "class_g = 'Dunst'"
+        ];
+
+        blur-background-exclude = [
+          "class_g = 'Dunst'"
+        ];
+
+        backend = "glx";
+        vsync = false;
+        mark-wmwin-focused = true;
+        mark-ovredir-focused = true;
+        detect-rounded-corners = true;
+        detect-client-opacity = false;
+        detect-transient = true;
+        detect-client-leader = true;
+        use-damage = true;
+        log-level = "info";
+
+        wintypes = {
+          normal = {
+            fade = true;
+            shadow = false;
+          };
+          tooltip = {
+            fade = true;
+            shadow = false;
+            opacity = 0.75;
+            focus = true;
+            full-shadow = false;
+          };
+          dock = {
+            shadow = false;
+          };
+          dnd = {
+            shadow = false;
+          };
+          popup_menu = {
+            opacity = 1.0;
+          };
+          dropdown_menu = {
+            opacity = 1.0;
+          };
+        };
+      };
+    };
+
+    gvfs.enable = true; # Mount, trash, and other functionalities
+    tumbler.enable = true; # Thumbnail support for images
+
+    # Emacs runs as a daemon
+    emacs = {
+      enable = true;
+      package = pkgs.emacs-unstable;
+    };
+  };
+
+  # When emacs builds from no cache, it exceeds the 90s timeout default
+  systemd.user.services.emacs = {
+    serviceConfig.TimeoutStartSec = "7min";
+  };
+
+  # Enable CUPS to print documents
+  # services.printing.enable = true;
+  # services.printing.drivers = [ pkgs.brlaser ]; # Brother printer driver
+
+  # Enable sound
+  # sound.enable = true;
+  # hardware.pulseaudio.enable = true;
+
+  # Video support
+  hardware = {
+    graphics.enable = true;
+    # nvidia.modesetting.enable = true;
+
+    # Enable Xbox support
+    # xone.enable = true;
+
+    # Crypto wallet support
+    ledger.enable = true;
+  };
+
+  # Add docker daemon
+  virtualisation.docker.enable = true;
+  virtualisation.docker.logDriver = "json-file";
+
+  # It's me, it's you, it's everyone
+  users.users = {
+    ${user} = {
+      isNormalUser = true;
+      extraGroups = [
+        "wheel" # Enable ‘sudo’ for the user.
+        "docker"
+      ];
+      shell = pkgs.zsh;
+      openssh.authorizedKeys.keys = keys;
+    };
+
+    root = {
+      openssh.authorizedKeys.keys = keys;
+    };
+  };
+
+  # Don't require password for users in `wheel` group for these commands
+  security.sudo = {
+    enable = true;
+    extraRules = [
+      {
+        commands = [
+          {
+            command = "${pkgs.systemd}/bin/reboot";
+            options = [ "NOPASSWD" ];
+          }
+        ];
+        groups = [ "wheel" ];
+      }
+    ];
+  };
+
+  fonts.packages = with pkgs; [
+    dejavu_fonts
+    emacs-all-the-icons-fonts
+    feather-font # from overlay
+    jetbrains-mono
+    font-awesome
+    noto-fonts
+    noto-fonts-color-emoji
+  ];
+
+  environment.systemPackages = with pkgs; [
+    # Emacs with automatic package management from overlay
+    (emacsWithPackagesFromUsePackage {
+      config = ../config/emacs/emacs.el;
+      defaultInitFile = true;
+      package = emacs-unstable;
+      alwaysEnsure = true;
+      extraEmacsPackages =
+        epkgs: with epkgs; [
+          magit
+          company
+          nix-mode
+          use-package
+        ];
+    })
+    gitAndTools.gitFull
+    inetutils
+  ];
+
+  system.stateVersion = "21.05"; # Don't change this
+}

modules/darwin/casks.nix

@@ -1,80 +1,89 @@
-_:
+{ pkgs }:
+let
+  casks = pkgs.brewCasks;
 
+  # the override to replace the package’s source fetch itself rather than just changing a downstream hash field
+  overrideCaskWithHash = name: hash:
+    casks.${name}.overrideAttrs (oldAttrs: {
+      src = pkgs.fetchurl {
+        url = builtins.head oldAttrs.src.urls;
+        hash = hash;
+      };
+    });
+  overriddenCasks = {
+    "box-tools" = overrideCaskWithHash "box-tools" "sha256-e7QZ/mWye86d7GDSgD+CtHDLCp/odiFwDcdg7/qxqKc=";
+    daisydisk = overrideCaskWithHash "daisydisk" "sha256-Re9GOfK03Gogb4Ep1itUJm60L94qvGfXgjqpLg8GQlc=";
+    keybase = overrideCaskWithHash "keybase" "sha256-CnFlLeU/BIhiUYebtRpUjJWE0QrsdZsiiZGzRUi31zg=";
+  };
+in
 [
-  # Development Tools
+  # Development tools
-  "arduino-ide"
+  casks.arduino-ide
-  "homebrew/cask/docker-desktop"
+  casks."docker-desktop"
-  "iterm2"
+  casks.iterm2
-  "oracle-jdk"
+  casks.oracle-jdk
-  "visual-studio-code"
+  casks."visual-studio-code"
 
   # Creative tools
-  "blender"
+  casks.blender
-  "gimp"
+  casks.gimp
-  "inkscape"
+  casks.inkscape
-  "vcv-rack"
+  casks."vcv-rack"
-  #"affinity-designer"
-  #"affinity-photo"
-  #"affinity-publisher"
 
-  # Communication Tools
+  # Communication tools
-  "adium"
+  casks.adium
-  "discord"
+  casks.discord
-  "signal"
+  casks.signal
-  "webex"
+  casks.webex
-  "whatsapp"
+  casks.whatsapp
-  "zoom"
+  casks.zoom
 
+  # Utility tools
+  # These casks currently fail during Homebrew download/build in this environment.
+  # casks."blackhole-16ch"
+  # casks."blackhole-2ch"
+  casks."box-drive"
+  # box-tools currently fails during unpack/install in this environment.
+  # overriddenCasks."box-tools"
+  # daisydisk currently fails with an upstream hash mismatch in this environment.
+  # overriddenCasks.daisydisk
+  # casks."karabiner-elements"
+  overriddenCasks.keybase
+  (overrideCaskWithHash "smartsheet" "sha256-ShCJAKDWMWy++3IC00YdyABvsmLW6DrpvJABAkFQXOA=")
+  casks.spamsieve
+  casks."syncthing-app"
+  casks."synology-drive"
 
-  # Utility Tools
+  # Entertainment tools
+  casks.qobuz
+  casks.steam
+  casks."handbrake-app"
+  casks."jellyfin-media-player"
+  casks.mediaelch
+  casks.obs
+  casks."vimediamanager"
+  casks.vlc
 
-  "blackhole-16ch"
+  # Productivity tools
-  "blackhole-2ch"
+  casks."1password"
-  "box-drive"
+  casks.bitwarden
-  "box-tools"
+  casks.calibre
-  "daisydisk"
+  casks."dbeaver-community"
-  "karabiner-elements"
+  casks.element
-  "keybase"
+  casks."gpg-suite"
-  "spamsieve"
+  casks."macdown-3000"
-  "syncthing-app"
+  casks.mailmate
-  "synology-drive"
+  casks.orcaslicer
-
+  casks.remanager
-  # Entertainment Tools
+  casks."qmk-toolbox"
-   "qobuz"
+  casks.smartsheet
-   "steam"
+  casks."copilot-cli"
-  "handbrake-app"
-  "jellyfin-media-player"
-  "mediaelch"
-  "obs"
-  "vimediamanager"  
-  "vlc"
-
-  # Productivity Tools
-  "1Password"
-  "bitwarden"
-  "calibre"
-  "dbeaver-community"
-  "element"
-  "gpg-suite"
-  "macdown-3000"
-  "mailmate"
-  "orcaslicer"
-  "remanager"
-  "qmk-toolbox"  
-  "smartsheet"
-  "spamsieve"
-#  "sqlitestudio" # Doesn't work without Rosetta
-   "tigervnc"
-   #  "virtualbox" # build error?
-  "copilot-cli"
 
   # Browsers
-  "brave-browser"
+  casks."brave-browser"
-  "firefox"
+  casks.firefox
-  "google-chrome"
+  casks."google-chrome"
 
- 
+  # X11
-
+  casks.xquartz
-# x11
-"xquartz"
 ]

modules/darwin/home-manager.nix

@@ -9,6 +9,7 @@
 
 let
   user = "olaf";
+  casks = import ./casks.nix { inherit pkgs; };
   # Define the content of your file as a derivation
   myEmacsLauncher = pkgs.writeScript "emacs-launcher.command" ''
     #!/bin/sh
@@ -32,50 +33,10 @@ in
   };
 
   homebrew = {
-    enable = true;
+    enable = false;
-    
-    casks = pkgs.callPackage ./casks.nix { };
-    onActivation = {
-      cleanup = "uninstall";
-      autoUpdate = true;
-      upgrade = true;
   };
 
-    # These app IDs are from using the mas CLI app
+  environment.systemPackages = casks;
-    # mas = mac app store
-    # https://github.com/mas-cli/mas
-    #
-    # $ nix shell nixpkgs#mas
-    # $ mas search <app name>
-    #
-    # If you have previously added these apps to your Mac App Store profile (but not installed them on this system),
-    # you may receive an error message "Redownload Unavailable with This Apple ID".
-    # This message is safe to ignore.
-
-    masApps = {
-      "1Password for Safari" = 1569813296; # (8.10.82)
-      "Affinity Designer 2" = 1616831348;
-      "Affinity Photo 2: Image Editor" = 1616822987;
-      "Affinity Publisher 2" = 1606941598;
-      "Apple Remote Desktop" = 409907375; # (3.11)
-      # "DaisyDisk" = 411643860; # (4.32)  # Don't use this, we need the official version that is not sandboxed
-      "Fantastical - Calendar" = 975937182;
-      " Fedistar" =  6445863996; # (1.13.1)
-      "Home Assistant" = 1099568401; # (2025.7.1)
-      "Ice Cubes for Mastodon" = 6444915884; # (1.11.3)
-      "LibreOffice" = 1630474372;
-      "Monal - XMPP Chatting " = 1637078500;
-      "MQTT Explorer" = 1455214828; # (0.3.5)
-      "Night Sky" = 475772902; # 475772902
-      "Native SQLite Manager" = 1416282836; # (1.31.0)
-      "Remarkable Desktop" = 1276493162; # (3.19.0)
-
-      "Slack for Desktop" = 803453959; # (4.45.60)
-      "WiFi Explorer: Scanner" = 494803304; # (3.5.6)
-      "Wireguard" = 1451685025; # (1.0.16)
-      ###      "1Password: Password Manager" = 1511601750; # (8.11.0) Does not seem to insta
-    };
-  };
 
   # Enable home-manager
   home-manager = {

modules/nixos/README.md

@@ -0,0 +1,10 @@
+## Layout
+```
+.
+├── config             # Config files not written in Nix
+├── default.nix        # Defines module, system-level config,
+├── disk-config.nix    # Disks, partitions, and filesystems
+├── files.nix          # Non-Nix, static configuration files (now immutable!)
+├── home-manager.nix   # Defines user programs
+├── packages.nix       # List of packages to install for NixOS
+```

modules/nixos/config/polybar/bars.ini

@@ -0,0 +1,498 @@
+;; ┌────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▄░█▀█░█▀▄░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▄░█▀█░█▀▄░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀░░▀░▀░▀░▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[bar]
+fill = 
+empty = 
+indicator = ⏽
+; Nerd font :   ,  ⏽,  樂 籠 錄 , 雷 絛
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/volume]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+master-soundcard = default
+speaker-soundcard = default
+headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <bar-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+label-muted = " Muted"
+label-muted-foreground = ${color.foreground-alt}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+
+; Only applies if <bar-volume> is used
+bar-volume-width = 10
+bar-volume-gradient = false
+
+bar-volume-indicator = ${bar.indicator}
+bar-volume-indicator-foreground = ${color.foreground}
+
+bar-volume-fill = ${bar.fill}
+bar-volume-foreground-0 = ${color.foreground}
+bar-volume-foreground-1 = ${color.foreground}
+bar-volume-foreground-2 = ${color.foreground}
+
+bar-volume-empty = ${bar.empty}
+bar-volume-empty-foreground = ${color.foreground}
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/brightness]
+;type = internal/xbacklight
+type = internal/backlight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+;card = intel_backlight
+card = amdgpu_bl0
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp> <bar>
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+; Only applies if <bar> is used
+bar-width = 10
+bar-gradient = false
+
+bar-indicator = ${bar.indicator}
+bar-indicator-foreground = ${color.foreground}
+
+bar-fill = ${bar.fill}
+bar-foreground-0 = ${color.foreground}
+bar-foreground-1 = ${color.foreground}
+bar-foreground-2 = ${color.foreground}
+
+bar-empty = ${bar.empty}
+bar-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery_bar]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT1
+adapter = ACAD
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <bar-capacity>
+format-charging-prefix = " "
+
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <bar-capacity>
+format-discharging-prefix = " " 
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+format-full = <label-full>
+format-full-prefix = " "
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+
+label-charging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+label-full = " Full"
+
+; Only applies if <bar-capacity> is used
+bar-capacity-width = 10
+bar-capacity-gradient = false
+
+bar-capacity-indicator = ${bar.indicator}
+bar-capacity-indicator-foreground = ${color.foreground}
+
+bar-capacity-fill = ${bar.fill}
+bar-capacity-foreground-0 = ${color.foreground}
+bar-capacity-foreground-1 = ${color.foreground}
+bar-capacity-foreground-2 = ${color.foreground}
+
+bar-capacity-empty = ${bar.empty}
+bar-capacity-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu_bar]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <bar-load> <label>
+format-prefix = " "
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = "%percentage%%"
+
+; Only applies if <bar-load> is used
+bar-load-width = 10
+bar-load-gradient = false
+
+bar-load-indicator = ${bar.indicator}
+bar-load-indicator-foreground = ${color.foreground}
+
+bar-load-fill = ${bar.fill}
+bar-load-foreground-0 = ${color.foreground}
+bar-load-foreground-1 = ${color.foreground}
+bar-load-foreground-2 = ${color.foreground}
+
+bar-load-empty = ${bar.empty}
+bar-load-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem_bar]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+;;mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 30
+
+; Display fixed precision values
+; Default: false
+fixed-values = false
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <bar-used> <label-mounted>
+format-mounted-prefix = " "
+
+; Available tags:
+;   <label-unmounted> (default)
+format-unmounted = <label-unmounted>
+format-unmounted-prefix = " "
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = %used%/%total%
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+label-unmounted = "%mountpoint%: not mounted"
+
+; Only applies if <bar-used> is used
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = ${bar.indicator}
+bar-used-indicator-foreground = ${color.foreground}
+
+bar-used-fill = ${bar.fill}
+bar-used-foreground-0 = ${color.foreground}
+bar-used-foreground-1 = ${color.foreground}
+bar-used-foreground-2 = ${color.foreground}
+
+bar-used-empty = ${bar.empty}
+bar-used-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory_bar]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 2
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <bar-used> <label>
+format-prefix = " "
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = "%mb_used%"
+
+; Only applies if <bar-used> is used
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = ${bar.indicator}
+bar-used-indicator-foreground = ${color.foreground}
+
+bar-used-fill = ${bar.fill}
+bar-used-foreground-0 = ${color.foreground}
+bar-used-foreground-1 = ${color.foreground}
+bar-used-foreground-2 = ${color.foreground}
+
+bar-used-empty = ${bar.empty}
+bar-used-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd_bar]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online = <label-song> <bar-progress> <label-time>
+format-online-prefix = 
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+format-offline = <label-offline>
+format-offline-prefix = 
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  " %artist% - %title%"
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+label-time = %elapsed% / %total%
+
+; Available tokens:
+;   None
+label-offline = " Offline"
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-pause = 
+icon-stop = 
+icon-next = 
+icon-prev = 
+icon-seekf = 
+icon-seekb = 
+icon-random = 
+icon-repeat = 
+icon-repeatone = 
+icon-single = 
+icon-consume =
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+toggle-on-foreground = ${color.primary}
+toggle-off-foreground = ${color.secondary}
+
+; Only applies if <bar-progress> is used
+bar-progress-width = 10
+bar-progress-gradient = false
+
+bar-progress-indicator = ${bar.indicator}
+bar-progress-indicator-foreground = ${color.foreground}
+
+bar-progress-fill = ${bar.fill}
+bar-progress-foreground-0 = ${color.foreground}
+bar-progress-foreground-1 = ${color.foreground}
+bar-progress-foreground-2 = ${color.foreground}
+
+bar-progress-empty = ${bar.empty}
+bar-progress-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

modules/nixos/config/polybar/colors.ini

@@ -0,0 +1,9 @@
+[color]
+
+background = #1F1F1F
+foreground = #FFFFFF
+foreground-alt = #8F8F8F
+module-fg = #FFFFFF
+primary = #546e7a
+secondary = #E53935
+alternate = #7cb342

modules/nixos/config/polybar/config.ini

@@ -0,0 +1,215 @@
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 0
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; Bar Settings
+
+[bar/main]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor =
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 98%
+height = 40
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 1%
+offset-y = 2%:-12
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.background}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.foreground}
+
+; Value used for drawing rounded corners
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 2.0
+radius-bottom = 2.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 2
+line-color = ${color.primary}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+border-bottom-size = 0
+border-bottom-color = ${color.primary}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 0
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 2
+module-margin-right = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; Fonts
+font-0 = "@font0@"
+font-1 = "@font1@"
+
+; Modules
+modules-left = launcher workspaces
+modules-center = date popup-calendar
+modules-right = pulseaudio memory cpu updates sysmenu
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; The separator will be inserted between the output of each module
+separator =
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+wm-name = bspwm
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = none
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${color.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Available options:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+wm-restack = bspwm
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+; dpi = 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = true
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = bspc desktop -l next
+click-right =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+; bspwm
+scroll-up = bspc desktop -f prev.local
+scroll-down = bspc desktop -f next.local
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+;throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = false
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false

modules/nixos/config/polybar/modules.ini

@@ -0,0 +1,674 @@
+;; ┌────────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/alsa]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+master-soundcard = default
+speaker-soundcard = default
+headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <label-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+label-muted = " Muted"
+label-muted-foreground = ${color.foreground-alt}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <label>
+format-prefix = 
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = " %percentage%%"
+
+; Spacing between individual per-core ramps
+;;ramp-coreload-spacing = 1
+;;ramp-coreload-0 = ${cpu.load0}
+;;ramp-coreload-1 = ${cpu.load1}
+
+;;ramp-load-0 = ${cpu.load0}
+;;ramp-load-1 = ${cpu.load1}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/date]
+type = internal/date
+
+; Seconds to sleep between updates
+interval = 1.0
+
+; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+;;date = %Y-%m-%d%
+
+; Optional time format
+time = " %I:%M %p"
+
+; if `date-alt` or `time-alt` is defined, clicking
+; the module will toggle between formats
+;;date-alt = %A, %d %B %Y
+#time-alt = " %a, %d %b %Y"
+
+; Available tags:
+;   <label> (default)
+format = <label>
+
+; Available tokens:
+;   %date%
+;   %time%
+; Default: %date%
+label = %time%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+;;mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 30
+
+; Display fixed precision values
+; Default: false
+fixed-values = true
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <label-mounted>
+format-mounted-prefix = 
+
+; Available tags:
+;   <label-unmounted> (default)
+format-unmounted = <label-unmounted>
+format-unmounted-prefix = 
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = " %free%"
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+label-unmounted = " %mountpoint%: not mounted"
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <label>
+format-prefix = 
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = " %mb_used%"
+
+; Only applies if <ramp-used> is used
+;;ramp-used-0 = ${memory.used0}
+;;ramp-used-1 = ${memory.used1}
+;;ramp-used-2 = ${memory.used2}
+
+; Only applies if <ramp-free> is used
+;;ramp-free-0 = ${memory.free0}
+;;ramp-free-1 = ${memory.free1}
+;;ramp-free-2 = ${memory.free2}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online = <label-song> <icon-prev> <toggle> <icon-next>
+format-online-prefix = 
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+format-offline = <label-offline>
+format-offline-prefix = 
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  " %artist% - %title%"
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+label-time = %elapsed% / %total%
+
+; Available tokens:
+;   None
+label-offline = " Offline"
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-pause = 
+icon-stop = 
+icon-next = 
+icon-prev = 
+icon-seekf = 
+icon-seekb = 
+icon-random = 
+icon-repeat = 
+icon-repeatone = 
+icon-single = 
+icon-consume =
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+toggle-on-foreground = ${color.primary}
+toggle-off-foreground = ${color.secondary}
+
+; Only applies if <bar-progress> is used
+;;bar-progress-width = 45
+;;bar-progress-indicator = |
+;;bar-progress-fill = ─
+;;bar-progress-empty = ─
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; If you use both a wired and a wireless network, just add 2 module definitions. For example
+[module/wired-network]
+type = internal/network
+interface = eth0
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1.0
+
+; Test connectivity every Nth update
+; A value of 0 disables the feature
+; NOTE: Experimental (needs more testing)
+; Default: 0
+;ping-interval = 3
+
+; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
+; Minimum output width of upload/download rate
+; Default: 3
+;;udspeed-minwidth = 5
+
+; Accumulate values from all interfaces
+; when querying for up/downspeed rate
+; Default: false
+accumulate-stats = true
+
+; Consider an `UNKNOWN` interface state as up.
+; Some devices have an unknown state, even when they're running
+; Default: false
+unknown-as-up = true
+
+; Available tags:
+;   <label-connected> (default)
+;   <ramp-signal>
+format-connected = <label-connected>
+format-connected-prefix = 
+
+; Available tags:
+;   <label-disconnected> (default)
+format-disconnected = <label-disconnected>
+format-disconnected-prefix = 
+
+; Available tags:
+;   <label-connected> (default)
+;   <label-packetloss>
+;   <animation-packetloss>
+;;format-packetloss = <animation-packetloss> <label-connected>
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: %ifname% %local_ip%
+label-connected = "%{A1:networkmanager_dmenu &:} %essid%%{A}"
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+; Default: (none)
+label-disconnected = "%{A1:networkmanager_dmenu &:} Offline%{A}"
+;;label-disconnected-foreground = #66ffffff
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: (none)
+;label-packetloss = %essid%
+;label-packetloss-foreground = #eefafafa
+
+; Only applies if <ramp-signal> is used
+ramp-signal-0 = 
+ramp-signal-1 = 
+ramp-signal-2 = 
+
+; Only applies if <animation-packetloss> is used
+;;animation-packetloss-0 = ⚠
+;;animation-packetloss-0-foreground = #ffa64c
+;;animation-packetloss-1 = ⚠
+;;animation-packetloss-1-foreground = #000000
+; Framerate in milliseconds
+;;animation-packetloss-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
+; If not, uses default sink
+; sink = @pulseaudiosink@
+
+; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
+; Default: true
+use-ui-max = false
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <label-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+label-muted = " Muted"
+label-muted-foreground = ${color.foreground-alt}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/temperature]
+type = internal/temperature
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Thermal zone to use
+; To list all the zone types, run 
+; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
+; Default: 0
+thermal-zone = 0
+
+; Full path of temperature sysfs path
+; Use `sensors` to find preferred temperature source, then run
+; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
+; to find path to desired file
+; Default reverts to thermal zone setting
+;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
+hwmon-path = /sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/hwmon/hwmon0/temp1_input
+
+; Threshold temperature to display warning label (in degrees celsius)
+; Default: 80
+warn-temperature = 65
+
+; Whether or not to show units next to the temperature tokens (°C, °F)
+; Default: true
+units = true
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+format = <ramp> <label>
+
+; Available tags:
+;   <label-warn> (default)
+;   <ramp>
+format-warn = <ramp> <label-warn>
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label = %temperature-c%
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label-warn = "%temperature-c%"
+label-warn-foreground = ${color.secondary}
+
+; Requires the <ramp> tag
+; The icon selection will range from 0 to `warn-temperature`
+; with the current temperature as index.
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/keyboard]
+type = internal/xkeyboard
+
+; List of indicators to ignore
+blacklist-0 = num lock
+blacklist-1 = scroll lock
+
+; Available tags:
+;   <label-layout> (default)
+;   <label-indicator> (default)
+format = <label-layout> <label-indicator>
+format-prefix = 
+
+; Available tokens:
+;   %layout%
+;   %name%
+;   %number%
+; Default: %layout%
+label-layout = " %layout%"
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-indicator-on = %name%
+label-indicator-on-foreground = ${color.primary}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/title]
+type = internal/xwindow
+
+; Available tags:
+;   <label> (default)
+format = <label>
+format-prefix = 
+
+; Available tokens:
+;   %title%
+; Default: %title%
+label = " %title%"
+label-maxlen = 30
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/workspaces]
+type = internal/xworkspaces
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; Create click handler used to focus desktop
+; Default: true
+enable-click = true
+
+; Create scroll handlers used to cycle desktops
+; Default: true
+enable-scroll = true
+
+; icon-[0-9]+ = <desktop-name>;<icon>
+; NOTE: The desktop name needs to match the name configured by the WM
+; You can get a list of the defined desktops using:
+; $ xprop -root _NET_DESKTOP_NAMES
+
+; Emacs, Calendar, News (General)
+icon-0 = 1;
+; Terminal, Emacs (IDE)
+icon-1 = 2;
+; Slack, Dev Tools Browser
+icon-2 = 3;
+; Chat, News (Financial)
+icon-3 = 4;
+; Apple Music, Media
+icon-4 = 5;
+; Monitoring, Emacs (Journal)
+icon-5 = 6;
+icon-default = 
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
+; Default: <label-state>
+format = <label-state>
+format-padding = 0
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-monitor = %name%
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-active = %icon%
+label-active-foreground = ${color.primary}
+label-active-overline = ${color.primary}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-occupied = %icon%
+label-occupied-foreground = ${color.alternate}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-urgent = %icon%
+label-urgent-foreground = ${color.secondary}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-empty = %icon%
+
+label-active-padding = 2
+label-urgent-padding = 2
+label-occupied-padding = 2
+label-empty-padding = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

modules/nixos/config/polybar/user_modules.ini

@@ -0,0 +1,74 @@
+;; ┌──────────────────────────────────────────────────────────────────────────────-----┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█░█░█▀▀░█▀▀░█▀▄░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀ │
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░▀▀█░█▀▀░█▀▄░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█ │
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀░▀░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀ │
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └──────────────────────────────────────────────────────────────────────────────-----┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/updates]
+type = custom/script
+
+; Available tokens:
+;   %counter%
+; Command to be executed (using "/usr/bin/env sh -c [command]")
+exec = @packages@
+
+; Conditional command that, if defined, needs to exit successfully
+; before the main exec command is invoked.
+; Default: ""
+;;exec-if = ""
+
+; Will the script output continous content?
+; Default: false
+tail = true
+
+; Seconds to sleep between updates
+; Default: 2 (0 if `tail = true`)
+interval = 0
+
+; Available tags:
+;   <output> - deprecated
+;   <label> (default)
+format = <label>
+format-prefix = 
+
+; Available tokens:
+;   %output%
+; Default: %output%
+label = %output%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+click-left = @searchpkgs@
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/launcher]
+type = custom/text
+content =  
+content-background = ${color.primary}
+content-foreground = ${color.module-fg}
+content-padding = 2
+click-left = @launcher@
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/popup-calendar]
+type = custom/script
+exec = @calendar@
+interval = 5
+click-left = @calendar@ --popup &
+
+[module/sysmenu]
+type = custom/text
+content = 
+content-background = ${color.primary}
+content-foreground = ${color.module-fg}
+content-padding = 2
+click-left = @powermenu@ &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

modules/nixos/config/rofi/colors.rasi

@@ -0,0 +1,10 @@
+/* colors */
+
+* {
+  al:   #00000000;
+  bg:   #1F1F1FFF;
+  bga:  #546e7a33;
+  bar:  #FFFFFFFF;
+  fg:   #FFFFFFFF;
+  ac:   #546e7aFF;
+}

modules/nixos/config/rofi/confirm.rasi

@@ -0,0 +1,24 @@
+/* Confirm Dialog */
+
+@import "colors.rasi"
+
+* {
+    background-color:       @bg;
+    text-color:             @fg;
+	font:				 	"Iosevka Nerd Font 10";
+}
+
+window {
+    width:      			225px;
+    padding:    			25px;
+    border:					0px 0px 2px 0px;
+    border-radius:          0px;
+    border-color:           @ac;
+    location:               center;
+    y-offset:               -2em;
+}
+
+entry {
+    expand: 				true;
+    text-color:				@ac;
+}

modules/nixos/config/rofi/launcher.rasi

@@ -0,0 +1,119 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:                "Iosevka Nerd Font 10";
+	show-icons:          true;
+	icon-theme:          "Papirus";
+	display-drun:        "";
+	drun-display-format: "{name}";
+	disable-history:     false;
+	fullscreen:          false;
+	hide-scrollbar:      true;
+	sidebar-mode:        false;
+}
+
+@import "colors.rasi"
+
+window {
+	transparency:      "real";
+	background-color:  @bg;
+	text-color:        @fg;
+	border:            0px 0px 2px 0px;
+	border-color:      @ac;
+	border-radius:     0px;
+	width:             350px;
+	location:          center;
+	x-offset:          0;
+	y-offset:          0;
+}
+
+prompt {
+	enabled:          true;
+	padding:          0px;
+	background-color: @al;
+	text-color:       @bar;
+	font:             "feather 12";
+}
+
+entry {
+	background-color:     @al;
+	text-color:           @bar;
+	placeholder-color:    @bar;
+	expand:               true;
+	horizontal-align:     0;
+	placeholder:          "Search...";
+	padding:              0px 0px 0px 10px;
+	blink:                true;
+}
+
+inputbar {
+	children:            [ prompt, entry ];
+	background-color:     @ac;
+	text-color:           @bar;
+	expand:               false;
+	border:               0px;
+	border-radius:        0px;
+	border-color:         @ac;
+	margin:               0px;
+	padding:              12px;
+}
+
+listview {
+	background-color: @al;
+	padding:          0px;
+	columns:          1;
+	lines:            5;
+	spacing:          5px;
+	cycle:            true;
+	dynamic:          true;
+	layout:           vertical;
+}
+
+mainbox {
+	background-color: @al;
+	border:           0px;
+	border-radius:    0px;
+	border-color:     @ac;
+	children:         [ inputbar, listview ];
+	spacing:          0px;
+	padding:          0px;
+}
+
+element {
+	background-color: @al;
+	text-color:       @fg;
+	orientation:      horizontal;
+	border-radius:    0px;
+	padding:          10px;
+}
+
+element-icon {
+	background-color: transparent;
+	text-color:       inherit;
+	size:             24px;
+	border:           0px;
+}
+
+element-text {
+	background-color: transparent;
+	text-color:       inherit;
+	expand:           true;
+	horizontal-align: 0;
+	vertical-align:   0.5;
+	margin:           0px 2.5px 0px 2.5px;
+}
+
+element selected {
+	background-color: @bga;
+	text-color:       @fg;
+	border:           0px 0px 0px 0px;
+	border-radius:    0px;
+	border-color:     @ac;
+}

modules/nixos/config/rofi/message.rasi

@@ -0,0 +1,24 @@
+/* Confirm Dialog */
+
+@import "colors.rasi"
+
+* {
+    background-color:       @bg;
+    text-color:             @fg;
+	font:				 	"Iosevka Nerd Font 10";
+}
+
+window {
+    width:      			320px;
+    padding:    			25px;
+    border:					0px 0px 2px 0px;
+    border-radius:          0px;
+    border-color:           @ac;
+    location:               center;
+    y-offset:               -2em;
+}
+
+entry {
+    expand: 				true;
+    text-color:				@ac;
+}

modules/nixos/config/rofi/networkmenu.rasi

@@ -0,0 +1,126 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:                "Iosevka Nerd Font 10";
+	show-icons:          true;
+	icon-theme:          "Papirus";
+	display-drun:        "";
+	drun-display-format: "{name}";
+	disable-history:     false;
+	fullscreen:          false;
+	hide-scrollbar:      true;
+	sidebar-mode:        false;
+}
+
+@import "colors.rasi"
+
+window {
+	transparency:      "real";
+	background-color:  @bg;
+	text-color:        @fg;
+	border:            0px 0px 2px 0px;
+	border-color:      @ac;
+	border-radius:     0px;
+	width:             400px;
+	location:          center;
+	x-offset:          0;
+	y-offset:          0;
+}
+
+prompt {
+	enabled:          true;
+	padding:          0px 0px 0px 5px;
+	background-color: @al;
+	text-color:       @bar;
+}
+
+textbox-prompt-colon {
+	background-color: @al;
+	text-color:       @bar;
+	expand:           false;
+	str:              "";
+	font:             "feather 12";
+}
+
+entry {
+	background-color:     @al;
+	text-color:           @bar;
+	placeholder-color:    @bar;
+	expand:               true;
+	horizontal-align:     0;
+	placeholder:          "Search...";
+	padding:              0px 0px 0px 10px;
+	blink:                true;
+}
+
+inputbar {
+	children:            [ textbox-prompt-colon, prompt ];
+	background-color:     @ac;
+	text-color:           @bar;
+	expand:               false;
+	border:               0px;
+	border-radius:        0px;
+	border-color:         @ac;
+	margin:               0px;
+	padding:              12px;
+}
+
+listview {
+	background-color: @al;
+	padding:          0px;
+	columns:          1;
+	lines:            8;
+	spacing:          5px;
+	cycle:            true;
+	dynamic:          true;
+	layout:           vertical;
+}
+
+mainbox {
+	background-color: @al;
+	border:           0px;
+	border-radius:    0px;
+	border-color:     @ac;
+	children:         [ inputbar, listview ];
+	spacing:          0px;
+	padding:          0px;
+}
+
+element {
+	background-color: @al;
+	text-color:       @fg;
+	orientation:      horizontal;
+	border-radius:    0px;
+	padding:          10px 10px 10px -17px;
+}
+
+element-icon {
+	background-color: transparent;
+	text-color:       inherit;
+	size:             24px;
+	border:           0px;
+}
+
+element-text {
+	background-color: transparent;
+	text-color:       inherit;
+	expand:           true;
+	horizontal-align: 0;
+	vertical-align:   0.5;
+	margin:           0px 2.5px 0px 2.5px;
+}
+
+element selected {
+	background-color: @bga;
+	text-color:       @fg;
+	border:           0px 0px 0px 0px;
+	border-radius:    0px;
+	border-color:     @ac;
+}

modules/nixos/config/rofi/powermenu.rasi

@@ -0,0 +1,126 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:                "Iosevka Nerd Font 10";
+	show-icons:          true;
+	icon-theme:          "Papirus";
+	display-drun:        "";
+	drun-display-format: "{name}";
+	disable-history:     false;
+	fullscreen:          false;
+	hide-scrollbar:      true;
+	sidebar-mode:        false;
+}
+
+@import "colors.rasi"
+
+window {
+	transparency:      "real";
+	background-color:  @bg;
+	text-color:        @fg;
+	border:            0px 0px 2px 0px;
+	border-color:      @ac;
+	border-radius:     0px;
+	width:             350px;
+	location:          center;
+	x-offset:          0;
+	y-offset:          0;
+}
+
+prompt {
+	enabled:          true;
+	padding:          0px 0px 0px 5px;
+	background-color: @al;
+	text-color:       @bar;
+}
+
+textbox-prompt-colon {
+	background-color: @al;
+	text-color:       @bar;
+	expand:           false;
+	str:              "";
+	font:             "feather 12";
+}
+
+entry {
+	background-color:     @al;
+	text-color:           @bar;
+	placeholder-color:    @bar;
+	expand:               true;
+	horizontal-align:     0;
+	placeholder:          "Search...";
+	padding:              0px 0px 0px 10px;
+	blink:                true;
+}
+
+inputbar {
+	children:            [ textbox-prompt-colon, prompt ];
+	background-color:     @ac;
+	text-color:           @bar;
+	expand:               false;
+	border:               0px;
+	border-radius:        0px;
+	border-color:         @ac;
+	margin:               0px;
+	padding:              12px;
+}
+
+listview {
+	background-color: @al;
+	padding:          0px;
+	columns:          1;
+	lines:            5;
+	spacing:          5px;
+	cycle:            true;
+	dynamic:          true;
+	layout:           vertical;
+}
+
+mainbox {
+	background-color: @al;
+	border:           0px;
+	border-radius:    0px;
+	border-color:     @ac;
+	children:         [ inputbar, listview ];
+	spacing:          0px;
+	padding:          0px;
+}
+
+element {
+	background-color: @al;
+	text-color:       @fg;
+	orientation:      horizontal;
+	border-radius:    0px;
+	padding:          10px 10px 10px -17px;
+}
+
+element-icon {
+	background-color: transparent;
+	text-color:       inherit;
+	size:             24px;
+	border:           0px;
+}
+
+element-text {
+	background-color: transparent;
+	text-color:       inherit;
+	expand:           true;
+	horizontal-align: 0;
+	vertical-align:   0.5;
+	margin:           0px 2.5px 0px 2.5px;
+}
+
+element selected {
+	background-color: @bga;
+	text-color:       @fg;
+	border:           0px 0px 0px 0px;
+	border-radius:    0px;
+	border-color:     @ac;
+}

modules/nixos/config/rofi/styles.rasi

@@ -0,0 +1,126 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:                "Iosevka Nerd Font 10";
+	show-icons:          true;
+	icon-theme:          "Papirus";
+	display-drun:        "";
+	drun-display-format: "{name}";
+	disable-history:     false;
+	fullscreen:          false;
+	hide-scrollbar:      true;
+	sidebar-mode:        false;
+}
+
+@import "colors.rasi"
+
+window {
+	transparency:      "real";
+	background-color:  @bg;
+	text-color:        @fg;
+	border:            0px 0px 2px 0px;
+	border-color:      @ac;
+	border-radius:     0px;
+	width:             350px;
+	location:          center;
+	x-offset:          0;
+	y-offset:          0;
+}
+
+prompt {
+	enabled:          true;
+	padding:          0px 0px 0px 5px;
+	background-color: @al;
+	text-color:       @bar;
+}
+
+textbox-prompt-colon {
+	background-color: @al;
+	text-color:       @bar;
+	expand:           false;
+	str:              "";
+	font:             "feather 12";
+}
+
+entry {
+	background-color:     @al;
+	text-color:           @bar;
+	placeholder-color:    @bar;
+	expand:               true;
+	horizontal-align:     0;
+	placeholder:          "Search...";
+	padding:              0px 0px 0px 5px;
+	blink:                true;
+}
+
+inputbar {
+	children:            [ textbox-prompt-colon, entry ];
+	background-color:     @ac;
+	text-color:           @bar;
+	expand:               false;
+	border:               0px;
+	border-radius:        0px;
+	border-color:         @ac;
+	margin:               0px;
+	padding:              12px;
+}
+
+listview {
+	background-color: @al;
+	padding:          0px;
+	columns:          1;
+	lines:            5;
+	spacing:          5px;
+	cycle:            true;
+	dynamic:          true;
+	layout:           vertical;
+}
+
+mainbox {
+	background-color: @al;
+	border:           0px;
+	border-radius:    0px;
+	border-color:     @ac;
+	children:         [ inputbar, listview ];
+	spacing:          0px;
+	padding:          0px;
+}
+
+element {
+	background-color: @al;
+	text-color:       @fg;
+	orientation:      horizontal;
+	border-radius:    0px;
+	padding:          10px 10px 10px -17px;
+}
+
+element-icon {
+	background-color: transparent;
+	text-color:       inherit;
+	size:             24px;
+	border:           0px;
+}
+
+element-text {
+	background-color: transparent;
+	text-color:       inherit;
+	expand:           true;
+	horizontal-align: 0;
+	vertical-align:   0.5;
+	margin:           0px 2.5px 0px 2.5px;
+}
+
+element selected {
+	background-color: @bga;
+	text-color:       @fg;
+	border:           0px 0px 0px 0px;
+	border-radius:    0px;
+	border-color:     @ac;
+}

modules/nixos/disk-config.nix

@@ -0,0 +1,34 @@
+_: {
+  # This formats the disk with the ext4 filesystem
+  # Other examples found here: https://github.com/nix-community/disko/tree/master/example
+  disko.devices = {
+    disk = {
+      vdb = {
+        device = "/dev/%DISK%";
+        type = "disk";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              type = "EF00";
+              size = "100M";
+              content = {
+                type = "filesystem";
+                format = "vfat";
+                mountpoint = "/boot";
+              };
+            };
+            root = {
+              size = "100%";
+              content = {
+                type = "filesystem";
+                format = "ext4";
+                mountpoint = "/";
+              };
+            };
+          };
+        };
+      };
+    };
+  };
+}

modules/nixos/files.nix

@@ -0,0 +1,368 @@
+{ user, ... }:
+
+let
+  home           = builtins.getEnv "HOME";
+  xdg_configHome = "${home}/.config";
+  xdg_dataHome   = "${home}/.local/share";
+  xdg_stateHome  = "${home}/.local/state"; in
+{
+
+  "${xdg_configHome}/bspwm/bspwmrc" = {
+    executable = true;
+    text = ''
+      #! /bin/sh
+      #
+      # Set the number of workspaces
+      bspc monitor -d 1 2 3 4 5 6
+
+      # Launch keybindings daemon
+      pgrep -x sxhkd > /dev/null || sxhkd &
+
+      # Window configurations
+      bspc config border_width         0
+      bspc config window_gap          16
+      bspc config split_ratio          0.52
+      bspc config borderless_monocle   true
+      bspc config gapless_monocle      true
+
+      # Padding outside of the window
+      bspc config top_padding            60
+      bspc config bottom_padding         60
+      bspc config left_padding           60
+      bspc config right_padding          60
+
+      # Move floating windows
+      bspc config pointer_action1 move
+
+      # Resize floating windows
+      bspc config pointer_action2 resize_side
+      bspc config pointer_action2 resize_corner
+
+      # Set background and top bar
+      systemctl --user start polybar
+
+      sleep .25
+
+      # Wait for the network to be up
+      notify-send 'Waiting for network...'
+      while ! systemctl is-active --quiet network-online.target; do sleep 1; done
+      notify-send 'Network found.'
+
+      # Wait for the Emacs daemon
+      notify-send 'Starting Emacs...'
+      /run/current-system/sw/bin/emacsclient -a "" -e '(progn)' &
+
+      # Wait for Emacs daemon to be ready
+      while ! /run/current-system/sw/bin/emacsclient -e '(progn)' &>/dev/null; do
+      sleep 1
+      done
+      notify-send 'Emacs daemon started.'
+    '';
+  };
+
+  "${xdg_configHome}/sxhkd/sxhkdrc" = {
+    text = ''
+    # Close window
+    alt + F4
+          bspc node --close
+
+    # Make split ratios equal
+    super + equal
+          bspc node @/ --equalize
+
+    # Make split ratios balanced
+    super + minus
+          bspc node @/ --balance
+
+    # Toogle tiling of window
+    super + d
+          bspc query --nodes -n focused.tiled && state=floating || state=tiled; \
+          bspc node --state \~$state
+
+    # Toggle fullscreen of window
+    super + f
+          bspc node --state \~fullscreen
+
+    # Swap the current node and the biggest window
+    super + g
+          bspc node -s biggest.window
+
+    # Swap the current node and the smallest window
+    super + shift + g
+          bspc node -s biggest.window
+
+    # Alternate between the tiled and monocle layout
+    super + m
+          bspc desktop -l next
+
+    # Move between windows in monocle layout
+    super + {_, alt + }m
+          bspc node -f {next, prev}.local.!hidden.window
+
+    # Focus the node in the given direction
+    super + {_,shift + }{h,j,k,l}
+          bspc node -{f,s} {west,south,north,east}
+
+    # Focus left/right occupied desktop
+    super + {Left,Right}
+          bspc desktop --focus {prev,next}.occupied
+
+    # Focus left/right occupied desktop
+    super + {Up,Down}
+          bspc desktop --focus {prev,next}.occupied
+
+    # Focus left/right desktop
+    ctrl + alt + {Left,Right}
+          bspc desktop --focus {prev,next}
+
+    # Focus left/right desktop
+    ctrl + alt + {Up, Down}
+          bspc desktop --focus {prev,next}
+
+    # Focus the older or newer node in the focus history
+    super + {o,i}
+          bspc wm -h off; \
+          bspc node {older,newer} -f; \
+          bspc wm -h on
+
+    # Focus or send to the given desktop
+    super + {_,shift + }{1-9,0}
+          bspc {desktop -f,node -d} '^{1-9,10}'
+
+    # Preselect the direction
+    super + alt + {h,j,k,l}
+          bspc node -p {west,south,north,east}
+
+    # Cancel the preselect
+    # For context on syntax: https://github.com/baskerville/bspwm/issues/344
+    super + alt + {_,shift + }Escape
+          bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
+
+    # Preselect the direction
+    super + ctrl + {h,j,k,l}
+          bspc node -p {west,south,north,east}
+
+    # Cancel the preselect
+    # For context on syntax: https://github.com/baskerville/bspwm/issues/344
+    super + ctrl + {_,shift + }Escape
+          bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
+
+    # Set the node flags
+    super + ctrl + {m,x,s,p}
+          bspc node -g {marked,locked,sticky,private}
+
+    # Send the newest marked node to the newest preselected node
+    super + y
+          bspc node newest.marked.local -n newest.!automatic.local
+
+    # Program launcher
+    super + @space
+          rofi -config -no-lazy-grab -show drun -modi drun -theme /home/${user}/.config/rofi/launcher.rasi
+
+    # Terminal emulator
+    super + Return
+          bspc rule -a Alacritty -o state=floating rectangle=1024x768x0x0 center=true && /etc/profiles/per-user/${user}/bin/alacritty
+
+    # Terminal emulator
+    super + ctrl + Return
+          /etc/profiles/per-user/${user}/bin/alacritty
+
+    # Jump to workspaces
+    super + t
+          bspc desktop --focus ^2
+    super + b
+          bspc desktop --focus ^1
+    super + w
+          bspc desktop --focus ^4
+    super + Tab
+          bspc {node,desktop} -f last
+
+    # Keepass XC
+    super + shift + x
+          /etc/profiles/per-user/${user}/bin/keepassxc
+
+    # Emacs
+    # -c flag is --create-frame
+    # -a flag is fallback to plain emacs if daemon fails
+    super + alt + Return
+         emacsclient -c -a emacs
+
+    super + alt + e
+         systemctl --user restart emacs.service && \
+         emacsclient -c -a emacs
+
+    # Web browser
+    ctrl + alt + Return
+         google-chrome-stable
+
+    # File browser at home dir
+    super + shift + @space
+         pcmanfm
+
+    # Take a screenshot with PrintSc
+    Print
+         flameshot gui -c -p $HOME/.local/share/img/screenshots
+
+    # Lock the screen
+    ctrl + alt + BackSpace
+         i3lock
+
+    # Audio controls for + volume
+    XF86AudioRaiseVolume
+        pactl set-sink-volume @DEFAULT_SINK@ +5%
+
+    # Audio controls for - volume
+    XF86AudioLowerVolume
+        pactl set-sink-volume @DEFAULT_SINK@ -5%
+
+    # Audio controls for mute
+    XF86AudioMute
+        pactl set-sink-mute @DEFAULT_SINK@ toggle
+    '';
+  };
+
+  "${xdg_configHome}/polybar/bin/popup-calendar.sh" = {
+    executable = true;
+    text = ''
+      #!/bin/sh
+
+      DATE="$(/run/current-system/sw/bin/date +"%B %d, %Y")"
+      SCREEN_WIDTH=$(/run/current-system/sw/bin/xrandr | /run/current-system/sw/bin/grep '*' | /run/current-system/sw/bin/awk '{print $1}' | /run/current-system/sw/bin/cut -d 'x' -f1)
+      POSX=$(( (SCREEN_WIDTH / 2) - ((SCREEN_WIDTH / 2 * 625) / 10000) ))
+
+      case "$1" in
+      --popup)
+          /etc/profiles/per-user/${user}/bin/yad --calendar --fixed \
+            --posx=$POSX --posy=80 --no-buttons --borders=0 --title="yad-calendar" \
+            --close-on-unfocus
+        ;;
+      *)
+          echo "$DATE"
+        ;;
+      esac
+    '';
+  };
+
+  "${xdg_configHome}/polybar/bin/check-nixos-updates.sh" = {
+    executable = true;
+    text = ''
+      #!/bin/sh
+
+      /run/current-system/sw/bin/git -C ~/.local/share/src/nixpkgs fetch upstream master
+      UPDATES=$(/run/current-system/sw/bin/git -C ~/.local/share/src/nixpkgs rev-list origin/master..upstream/master --count 2>/dev/null);
+      /run/current-system/sw/bin/echo " $UPDATES"; # Extra space for presentation with icon
+      /run/current-system/sw/bin/sleep 1800;
+    '';
+  };
+
+  "${xdg_configHome}/polybar/bin/search-nixos-updates.sh" = {
+    executable = true;
+    text = ''
+      #!/bin/sh
+
+      /etc/profiles/per-user/${user}/bin/google-chrome-stable --new-window "https://search.nixos.org/packages"
+    '';
+  };
+
+  "${xdg_configHome}/rofi/colors.rasi".text = builtins.readFile ./config/rofi/colors.rasi;
+  "${xdg_configHome}/rofi/confirm.rasi".text = builtins.readFile ./config/rofi/confirm.rasi;
+  "${xdg_configHome}/rofi/launcher.rasi".text = builtins.readFile ./config/rofi/launcher.rasi;
+  "${xdg_configHome}/rofi/message.rasi".text = builtins.readFile ./config/rofi/message.rasi;
+  "${xdg_configHome}/rofi/networkmenu.rasi".text = builtins.readFile ./config/rofi/networkmenu.rasi;
+  "${xdg_configHome}/rofi/powermenu.rasi".text = builtins.readFile ./config/rofi/powermenu.rasi;
+  "${xdg_configHome}/rofi/styles.rasi".text = builtins.readFile ./config/rofi/styles.rasi;
+
+  "${xdg_configHome}/rofi/bin/launcher.sh" = {
+    executable = true;
+    text = ''
+      #!/bin/sh
+
+      rofi -no-config -no-lazy-grab -show drun -modi drun -theme ${xdg_configHome}/rofi/launcher.rasi
+    '';
+  };
+
+  # @todo: Don't use hardcoded src paths
+  "${xdg_configHome}/rofi/bin/powermenu.sh" = {
+    executable = true;
+    text = ''
+      #!/bin/sh
+
+      configDir="${xdg_configHome}/rofi"
+      uptime=$(uptime -p | sed -e 's/up //g')
+      rofi_command="rofi -no-config -theme $configDir/powermenu.rasi"
+
+      # Options
+      shutdown=" Shutdown"
+      reboot=" Restart"
+      lock=" Lock"
+      suspend=" Sleep"
+      logout=" Logout"
+
+      # Confirmation
+      confirm_exit() {
+	      rofi -dmenu\
+              -no-config\
+		      -i\
+		      -no-fixed-num-lines\
+		      -p "Are You Sure? : "\
+		      -theme $configDir/confirm.rasi
+      }
+
+      # Message
+      msg() {
+	      rofi -no-config -theme "$configDir/message.rasi" -e "Available Options  -  yes / y / no / n"
+      }
+
+      # Variable passed to rofi
+      options="$lock\n$suspend\n$logout\n$reboot\n$shutdown"
+      chosen="$(echo -e "$options" | $rofi_command -p "Uptime: $uptime" -dmenu -selected-row 0)"
+      case $chosen in
+          $shutdown)
+		      ans=$(confirm_exit &)
+		      if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			      systemctl poweroff
+		      elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			      exit 0
+              else
+			      msg
+              fi
+              ;;
+          $reboot)
+		      ans=$(confirm_exit &)
+		      if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			      systemctl reboot
+		      elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			      exit 0
+              else
+			      msg
+              fi
+              ;;
+          $lock)
+          betterlockscreen -l
+              ;;
+          $suspend)
+		      ans=$(confirm_exit &)
+		      if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			      mpc -q pause
+			      amixer set Master mute
+			      systemctl suspend
+		      elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			      exit 0
+              else
+			      msg
+              fi
+              ;;
+          $logout)
+		      ans=$(confirm_exit &)
+		      if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			      bspc quit
+		      elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			      exit 0
+              else
+			      msg
+              fi
+              ;;
+      esac
+   '';
+  };
+}

modules/nixos/home-manager.nix

@@ -0,0 +1,149 @@
+{
+  config,
+  pkgs,
+  lib,
+  ...
+}:
+
+let
+  user = "olaf";
+  xdg_configHome = "/home/${user}/.config";
+  shared-programs = import ../shared/home-manager.nix { inherit config pkgs lib;  };
+  shared-files = import ../shared/files.nix { inherit config pkgs; };
+
+  polybar-user_modules = builtins.replaceStrings
+    [
+      "@packages@"
+      "@searchpkgs@"
+      "@launcher@"
+      "@powermenu@"
+      "@calendar@"
+    ]
+    [
+      "${xdg_configHome}/polybar/bin/check-nixos-updates.sh"
+      "${xdg_configHome}/polybar/bin/search-nixos-updates.sh"
+      "${xdg_configHome}/polybar/bin/launcher.sh"
+      "${xdg_configHome}/rofi/bin/powermenu.sh"
+      "${xdg_configHome}/polybar/bin/popup-calendar.sh"
+    ]
+    (builtins.readFile ./config/polybar/user_modules.ini);
+
+  polybar-config = {
+    "global/wm" = {
+      margin-bottom = 0;
+      margin-top = 0;
+    };
+    "bar/main" = {
+      width = "98%";
+      height = 40;
+      background = "#000000";
+      foreground = "#ffffff";
+      font-0 = "DejaVu Sans:size=12;3";
+      font-1 = "feather:size=12;3";
+      modules-left = "launcher workspaces";
+      modules-center = "date popup-calendar";
+      modules-right = "pulseaudio memory cpu updates sysmenu";
+    };
+    settings = {
+      screenchange-reload = false;
+    };
+  };
+
+  polybar-modules = builtins.readFile ./config/polybar/modules.ini;
+  polybar-bars = builtins.readFile ./config/polybar/bars.ini;
+  polybar-colors = builtins.readFile ./config/polybar/colors.ini;
+
+in
+{
+  home = {
+    enableNixpkgsReleaseCheck = false;
+    username = "${user}";
+    homeDirectory = "/home/${user}";
+    packages = pkgs.callPackage ./packages.nix { };
+    file = shared-files // import ./files.nix { inherit user; };
+    stateVersion = "21.05";
+  };
+
+  # Use a dark theme
+  gtk = {
+    enable = true;
+    iconTheme = {
+      name = "Adwaita-dark";
+      package = pkgs.adwaita-icon-theme;
+    };
+    theme = {
+      name = "Adwaita-dark";
+      package = pkgs.adwaita-icon-theme;
+    };
+  };
+
+  # Screen lock
+  services = {
+    screen-locker = {
+      enable = true;
+      inactiveInterval = 10;
+      lockCmd = "${pkgs.i3lock-fancy-rapid}/bin/i3lock-fancy-rapid 10 15";
+    };
+
+    # Auto mount devices
+    udiskie.enable = true;
+
+    polybar = {
+      enable = true;
+      config = polybar-config;
+      extraConfig = polybar-bars + polybar-colors + polybar-modules + polybar-user_modules;
+      package = pkgs.polybarFull;
+      script = "polybar main &";
+    };
+
+    dunst = {
+      enable = true;
+      package = pkgs.dunst;
+      settings = {
+        global = {
+          monitor = 0;
+          follow = "mouse";
+          border = 0;
+          height = 400;
+          width = 320;
+          offset = "33x65";
+          indicate_hidden = "yes";
+          shrink = "no";
+          separator_height = 0;
+          padding = 32;
+          horizontal_padding = 32;
+          frame_width = 0;
+          sort = "no";
+          idle_threshold = 120;
+          font = "Noto Sans";
+          line_height = 4;
+          markup = "full";
+          format = "<b>%s</b>\n%b";
+          alignment = "left";
+          transparency = 10;
+          show_age_threshold = 60;
+          word_wrap = "yes";
+          ignore_newline = "no";
+          stack_duplicates = false;
+          hide_duplicate_count = "yes";
+          show_indicators = "no";
+          icon_position = "left";
+          icon_theme = "Adwaita-dark";
+          sticky_history = "yes";
+          history_length = 20;
+          history = "ctrl+grave";
+          browser = "google-chrome-stable";
+          always_run_script = true;
+          title = "Dunst";
+          class = "Dunst";
+          max_icon_size = 64;
+        };
+      };
+    };
+  };
+
+  programs = shared-programs // {
+    gpg.enable = true;
+  };
+
+}

modules/nixos/packages.nix

@@ -0,0 +1,75 @@
+{ pkgs }:
+
+with pkgs;
+let
+  shared-packages = import ../shared/packages.nix { inherit pkgs; };
+in
+shared-packages
+++ [
+
+  # Security and authentication
+  yubikey-agent
+  keepassxc
+  private-internet-access
+
+  # App and package management
+  appimage-run
+  gnumake
+  cmake
+  home-manager
+  ansible
+
+  # Media and design tools
+  vlc
+  fontconfig
+  font-manager
+
+  # Productivity tools
+  bc # old school calculator
+  galculator
+
+  # Audio tools
+  pavucontrol # Pulse audio controls
+
+  # Testing and development tools
+  direnv
+  rofi
+  rofi-calc
+  postgresql
+  libtool # for Emacs vterm
+
+  # System
+  istat-menus
+  
+  # Screenshot and recording tools
+  flameshot
+
+  # Text and terminal utilities
+  feh # Manage wallpapers
+  screenkey
+  tree
+  unixtools.ifconfig
+  unixtools.netstat
+  xclip # For the org-download package in Emacs
+  xorg.xwininfo # Provides a cursor to click and learn about windows
+  xorg.xrandr
+
+  # File and system utilities
+  inotify-tools # inotifywait, inotifywatch - For file system events
+  i3lock-fancy-rapid
+  libnotify
+  pcmanfm # File browser
+  sqlite
+  xdg-utils
+
+  # Other utilities
+  yad # yad-calendar is used with polybar
+  xdotool
+  google-chrome
+
+  # PDF viewer
+  zathura
+
+  # Music and entertainment
+  spotify
+]

modules/shared/README.md

@@ -1,5 +1,5 @@
 ## Shared
-Much of the code running on macOS is actually found here.
+Much of the code running on MacOS or NixOS is actually found here.
 
 This configuration gets imported by both modules. Some configuration examples include `git`, `zsh`, `vim`, and `tmux`.