675 lines
16 KiB
INI
675 lines
16 KiB
INI
;; ┌────────────────────────────────────────────────────────────────┐
|
|
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
|
|
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
|
|
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
|
|
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
|
|
;; └────────────────────────────────────────────────────────────────┘
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/alsa]
|
|
type = internal/alsa
|
|
|
|
; Soundcard to be used
|
|
; Usually in the format hw:# where # is the card number
|
|
; You can find the different card numbers in `/proc/asound/cards`
|
|
master-soundcard = default
|
|
speaker-soundcard = default
|
|
headphone-soundcard = default
|
|
|
|
; Name of the master, speaker and headphone mixers
|
|
; Use the following command to list available mixer controls:
|
|
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
|
|
; If master, speaker or headphone-soundcard isn't the default,
|
|
; use `amixer -c # scontrols` instead where # is the number
|
|
; of the master, speaker or headphone soundcard respectively
|
|
;
|
|
; Default: Master
|
|
master-mixer = Master
|
|
|
|
; Optionally define speaker and headphone mixers
|
|
; Default: none
|
|
;;speaker-mixer = Speaker
|
|
; Default: none
|
|
;;headphone-mixer = Headphone
|
|
|
|
; NOTE: This is required if headphone_mixer is defined
|
|
; Use the following command to list available device controls
|
|
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
|
|
; You may also need to use `amixer -c # controls` as above for the mixer names
|
|
; Default: none
|
|
;;headphone-id = 9
|
|
|
|
; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
|
|
; Default: false
|
|
;;mapped = true
|
|
|
|
; Interval for volume increase/decrease (in percent points)
|
|
; Default: 5
|
|
interval = 5
|
|
|
|
; Available tags:
|
|
; <label-volume> (default)
|
|
; <ramp-volume>
|
|
; <bar-volume>
|
|
format-volume = <ramp-volume> <label-volume>
|
|
|
|
; Available tags:
|
|
; <label-muted> (default)
|
|
; <ramp-volume>
|
|
; <bar-volume>
|
|
format-muted = <label-muted>
|
|
format-muted-prefix =
|
|
|
|
; Available tokens:
|
|
; %percentage% (default)
|
|
label-volume = %percentage%%
|
|
|
|
; Available tokens:
|
|
; %percentage% (default
|
|
label-muted = " Muted"
|
|
label-muted-foreground = ${color.foreground-alt}
|
|
|
|
; Only applies if <ramp-volume> is used
|
|
ramp-volume-0 =
|
|
ramp-volume-1 =
|
|
ramp-volume-2 =
|
|
|
|
; If defined, it will replace <ramp-volume> when
|
|
; headphones are plugged in to `headphone_control_numid`
|
|
; If undefined, <ramp-volume> will be used for both
|
|
; Only applies if <ramp-volume> is used
|
|
ramp-headphones-0 =
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/cpu]
|
|
type = internal/cpu
|
|
|
|
; Seconds to sleep between updates
|
|
; Default: 1
|
|
interval = 1
|
|
|
|
; Available tags:
|
|
; <label> (default)
|
|
; <bar-load>
|
|
; <ramp-load>
|
|
; <ramp-coreload>
|
|
;;format = <label> <ramp-coreload>
|
|
format = <label>
|
|
format-prefix =
|
|
|
|
; Available tokens:
|
|
; %percentage% (default) - total cpu load averaged over all cores
|
|
; %percentage-sum% - Cumulative load on all cores
|
|
; %percentage-cores% - load percentage for each core
|
|
; %percentage-core[1-9]% - load percentage for specific core
|
|
label = " %percentage%%"
|
|
|
|
; Spacing between individual per-core ramps
|
|
;;ramp-coreload-spacing = 1
|
|
;;ramp-coreload-0 = ${cpu.load0}
|
|
;;ramp-coreload-1 = ${cpu.load1}
|
|
|
|
;;ramp-load-0 = ${cpu.load0}
|
|
;;ramp-load-1 = ${cpu.load1}
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/date]
|
|
type = internal/date
|
|
|
|
; Seconds to sleep between updates
|
|
interval = 1.0
|
|
|
|
; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
|
|
; NOTE: if you want to use syntax tags here you need to use %%{...}
|
|
;;date = %Y-%m-%d%
|
|
|
|
; Optional time format
|
|
time = " %I:%M %p"
|
|
|
|
; if `date-alt` or `time-alt` is defined, clicking
|
|
; the module will toggle between formats
|
|
;;date-alt = %A, %d %B %Y
|
|
#time-alt = " %a, %d %b %Y"
|
|
|
|
; Available tags:
|
|
; <label> (default)
|
|
format = <label>
|
|
|
|
; Available tokens:
|
|
; %date%
|
|
; %time%
|
|
; Default: %date%
|
|
label = %time%
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/filesystem]
|
|
type = internal/fs
|
|
|
|
; Mountpoints to display
|
|
mount-0 = /
|
|
;;mount-1 = /home
|
|
;;mount-2 = /var
|
|
|
|
; Seconds to sleep between updates
|
|
; Default: 30
|
|
interval = 30
|
|
|
|
; Display fixed precision values
|
|
; Default: false
|
|
fixed-values = true
|
|
|
|
; Spacing between entries
|
|
; Default: 2
|
|
;;spacing = 4
|
|
|
|
; Available tags:
|
|
; <label-mounted> (default)
|
|
; <bar-free>
|
|
; <bar-used>
|
|
; <ramp-capacity>
|
|
format-mounted = <label-mounted>
|
|
format-mounted-prefix =
|
|
|
|
; Available tags:
|
|
; <label-unmounted> (default)
|
|
format-unmounted = <label-unmounted>
|
|
format-unmounted-prefix =
|
|
|
|
; Available tokens:
|
|
; %mountpoint%
|
|
; %type%
|
|
; %fsname%
|
|
; %percentage_free%
|
|
; %percentage_used%
|
|
; %total%
|
|
; %free%
|
|
; %used%
|
|
; Default: %mountpoint% %percentage_free%%
|
|
label-mounted = " %free%"
|
|
|
|
; Available tokens:
|
|
; %mountpoint%
|
|
; Default: %mountpoint% is not mounted
|
|
label-unmounted = " %mountpoint%: not mounted"
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/memory]
|
|
type = internal/memory
|
|
|
|
; Seconds to sleep between updates
|
|
; Default: 1
|
|
interval = 1
|
|
|
|
; Available tags:
|
|
; <label> (default)
|
|
; <bar-used>
|
|
; <bar-free>
|
|
; <ramp-used>
|
|
; <ramp-free>
|
|
; <bar-swap-used>
|
|
; <bar-swap-free>
|
|
; <ramp-swap-used>
|
|
; <ramp-swap-free>
|
|
format = <label>
|
|
format-prefix =
|
|
|
|
; Available tokens:
|
|
; %percentage_used% (default)
|
|
; %percentage_free%
|
|
; %gb_used%
|
|
; %gb_free%
|
|
; %gb_total%
|
|
; %mb_used%
|
|
; %mb_free%
|
|
; %mb_total%
|
|
; %percentage_swap_used%
|
|
; %percentage_swap_free%
|
|
; %mb_swap_total%
|
|
; %mb_swap_free%
|
|
; %mb_swap_used%
|
|
; %gb_swap_total%
|
|
; %gb_swap_free%
|
|
; %gb_swap_used%
|
|
|
|
label = " %mb_used%"
|
|
|
|
; Only applies if <ramp-used> is used
|
|
;;ramp-used-0 = ${memory.used0}
|
|
;;ramp-used-1 = ${memory.used1}
|
|
;;ramp-used-2 = ${memory.used2}
|
|
|
|
; Only applies if <ramp-free> is used
|
|
;;ramp-free-0 = ${memory.free0}
|
|
;;ramp-free-1 = ${memory.free1}
|
|
;;ramp-free-2 = ${memory.free2}
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/mpd]
|
|
type = internal/mpd
|
|
|
|
; Host where mpd is running (either ip or domain name)
|
|
; Can also be the full path to a unix socket where mpd is running.
|
|
;;host = 127.0.0.1
|
|
;;port = 6600
|
|
;;password = mysecretpassword
|
|
|
|
; Seconds to sleep between progressbar/song timer sync
|
|
; Default: 1
|
|
interval = 1
|
|
|
|
; Available tags:
|
|
; <label-song> (default)
|
|
; <label-time>
|
|
; <bar-progress>
|
|
; <toggle> - gets replaced with <icon-(pause|play)>
|
|
; <toggle-stop> - gets replaced with <icon-(stop|play)>
|
|
; <icon-random>
|
|
; <icon-repeat>
|
|
; <icon-repeatone> (deprecated)
|
|
; <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
|
|
; <icon-consume>
|
|
; <icon-prev>
|
|
; <icon-stop>
|
|
; <icon-play>
|
|
; <icon-pause>
|
|
; <icon-next>
|
|
; <icon-seekb>
|
|
; <icon-seekf>
|
|
format-online = <label-song> <icon-prev> <toggle> <icon-next>
|
|
format-online-prefix =
|
|
|
|
;format-playing = ${self.format-online}
|
|
;format-paused = ${self.format-online}
|
|
;format-stopped = ${self.format-online}
|
|
|
|
; Available tags:
|
|
; <label-offline>
|
|
format-offline = <label-offline>
|
|
format-offline-prefix =
|
|
|
|
; Available tokens:
|
|
; %artist%
|
|
; %album-artist%
|
|
; %album%
|
|
; %date%
|
|
; %title%
|
|
; Default: %artist% - %title%
|
|
label-song = " %artist% - %title%"
|
|
label-song-maxlen = 25
|
|
label-song-ellipsis = true
|
|
|
|
; Available tokens:
|
|
; %elapsed%
|
|
; %total%
|
|
; Default: %elapsed% / %total%
|
|
label-time = %elapsed% / %total%
|
|
|
|
; Available tokens:
|
|
; None
|
|
label-offline = " Offline"
|
|
|
|
; Only applies if <icon-X> is used
|
|
icon-play =
|
|
icon-pause =
|
|
icon-stop =
|
|
icon-next =
|
|
icon-prev =
|
|
icon-seekf =
|
|
icon-seekb =
|
|
icon-random =
|
|
icon-repeat =
|
|
icon-repeatone =
|
|
icon-single =
|
|
icon-consume =
|
|
|
|
; Used to display the state of random/repeat/repeatone/single
|
|
; Only applies if <icon-[random|repeat|repeatone|single]> is used
|
|
toggle-on-foreground = ${color.primary}
|
|
toggle-off-foreground = ${color.secondary}
|
|
|
|
; Only applies if <bar-progress> is used
|
|
;;bar-progress-width = 45
|
|
;;bar-progress-indicator = |
|
|
;;bar-progress-fill = ─
|
|
;;bar-progress-empty = ─
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
; If you use both a wired and a wireless network, just add 2 module definitions. For example
|
|
[module/wired-network]
|
|
type = internal/network
|
|
interface = eth0
|
|
|
|
; Seconds to sleep between updates
|
|
; Default: 1
|
|
interval = 1.0
|
|
|
|
; Test connectivity every Nth update
|
|
; A value of 0 disables the feature
|
|
; NOTE: Experimental (needs more testing)
|
|
; Default: 0
|
|
;ping-interval = 3
|
|
|
|
; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
|
|
; Minimum output width of upload/download rate
|
|
; Default: 3
|
|
;;udspeed-minwidth = 5
|
|
|
|
; Accumulate values from all interfaces
|
|
; when querying for up/downspeed rate
|
|
; Default: false
|
|
accumulate-stats = true
|
|
|
|
; Consider an `UNKNOWN` interface state as up.
|
|
; Some devices have an unknown state, even when they're running
|
|
; Default: false
|
|
unknown-as-up = true
|
|
|
|
; Available tags:
|
|
; <label-connected> (default)
|
|
; <ramp-signal>
|
|
format-connected = <label-connected>
|
|
format-connected-prefix =
|
|
|
|
; Available tags:
|
|
; <label-disconnected> (default)
|
|
format-disconnected = <label-disconnected>
|
|
format-disconnected-prefix =
|
|
|
|
; Available tags:
|
|
; <label-connected> (default)
|
|
; <label-packetloss>
|
|
; <animation-packetloss>
|
|
;;format-packetloss = <animation-packetloss> <label-connected>
|
|
|
|
; Available tokens:
|
|
; %ifname% [wireless+wired]
|
|
; %local_ip% [wireless+wired]
|
|
; %local_ip6% [wireless+wired]
|
|
; %essid% [wireless]
|
|
; %signal% [wireless]
|
|
; %upspeed% [wireless+wired]
|
|
; %downspeed% [wireless+wired]
|
|
; %linkspeed% [wired]
|
|
; Default: %ifname% %local_ip%
|
|
label-connected = "%{A1:networkmanager_dmenu &:} %essid%%{A}"
|
|
|
|
; Available tokens:
|
|
; %ifname% [wireless+wired]
|
|
; Default: (none)
|
|
label-disconnected = "%{A1:networkmanager_dmenu &:} Offline%{A}"
|
|
;;label-disconnected-foreground = #66ffffff
|
|
|
|
; Available tokens:
|
|
; %ifname% [wireless+wired]
|
|
; %local_ip% [wireless+wired]
|
|
; %local_ip6% [wireless+wired]
|
|
; %essid% [wireless]
|
|
; %signal% [wireless]
|
|
; %upspeed% [wireless+wired]
|
|
; %downspeed% [wireless+wired]
|
|
; %linkspeed% [wired]
|
|
; Default: (none)
|
|
;label-packetloss = %essid%
|
|
;label-packetloss-foreground = #eefafafa
|
|
|
|
; Only applies if <ramp-signal> is used
|
|
ramp-signal-0 =
|
|
ramp-signal-1 =
|
|
ramp-signal-2 =
|
|
|
|
; Only applies if <animation-packetloss> is used
|
|
;;animation-packetloss-0 = ⚠
|
|
;;animation-packetloss-0-foreground = #ffa64c
|
|
;;animation-packetloss-1 = ⚠
|
|
;;animation-packetloss-1-foreground = #000000
|
|
; Framerate in milliseconds
|
|
;;animation-packetloss-framerate = 500
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/pulseaudio]
|
|
type = internal/pulseaudio
|
|
|
|
; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
|
|
; If not, uses default sink
|
|
; sink = @pulseaudiosink@
|
|
|
|
; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
|
|
; Default: true
|
|
use-ui-max = false
|
|
|
|
; Interval for volume increase/decrease (in percent points)
|
|
; Default: 5
|
|
interval = 5
|
|
|
|
; Available tags:
|
|
; <label-volume> (default)
|
|
; <ramp-volume>
|
|
; <bar-volume>
|
|
format-volume = <ramp-volume> <label-volume>
|
|
|
|
; Available tags:
|
|
; <label-muted> (default)
|
|
; <ramp-volume>
|
|
; <bar-volume>
|
|
format-muted = <label-muted>
|
|
format-muted-prefix =
|
|
|
|
; Available tokens:
|
|
; %percentage% (default)
|
|
label-volume = %percentage%%
|
|
|
|
; Available tokens:
|
|
; %percentage% (default
|
|
label-muted = " Muted"
|
|
label-muted-foreground = ${color.foreground-alt}
|
|
|
|
; Only applies if <ramp-volume> is used
|
|
ramp-volume-0 =
|
|
ramp-volume-1 =
|
|
ramp-volume-2 =
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/temperature]
|
|
type = internal/temperature
|
|
|
|
; Seconds to sleep between updates
|
|
; Default: 1
|
|
interval = 0.5
|
|
|
|
; Thermal zone to use
|
|
; To list all the zone types, run
|
|
; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
|
|
; Default: 0
|
|
thermal-zone = 0
|
|
|
|
; Full path of temperature sysfs path
|
|
; Use `sensors` to find preferred temperature source, then run
|
|
; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
|
|
; to find path to desired file
|
|
; Default reverts to thermal zone setting
|
|
;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
|
|
hwmon-path = /sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/hwmon/hwmon0/temp1_input
|
|
|
|
; Threshold temperature to display warning label (in degrees celsius)
|
|
; Default: 80
|
|
warn-temperature = 65
|
|
|
|
; Whether or not to show units next to the temperature tokens (°C, °F)
|
|
; Default: true
|
|
units = true
|
|
|
|
; Available tags:
|
|
; <label> (default)
|
|
; <ramp>
|
|
format = <ramp> <label>
|
|
|
|
; Available tags:
|
|
; <label-warn> (default)
|
|
; <ramp>
|
|
format-warn = <ramp> <label-warn>
|
|
|
|
; Available tokens:
|
|
; %temperature% (deprecated)
|
|
; %temperature-c% (default, temperature in °C)
|
|
; %temperature-f% (temperature in °F)
|
|
label = %temperature-c%
|
|
|
|
; Available tokens:
|
|
; %temperature% (deprecated)
|
|
; %temperature-c% (default, temperature in °C)
|
|
; %temperature-f% (temperature in °F)
|
|
label-warn = "%temperature-c%"
|
|
label-warn-foreground = ${color.secondary}
|
|
|
|
; Requires the <ramp> tag
|
|
; The icon selection will range from 0 to `warn-temperature`
|
|
; with the current temperature as index.
|
|
ramp-0 =
|
|
ramp-1 =
|
|
ramp-2 =
|
|
ramp-3 =
|
|
ramp-4 =
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/keyboard]
|
|
type = internal/xkeyboard
|
|
|
|
; List of indicators to ignore
|
|
blacklist-0 = num lock
|
|
blacklist-1 = scroll lock
|
|
|
|
; Available tags:
|
|
; <label-layout> (default)
|
|
; <label-indicator> (default)
|
|
format = <label-layout> <label-indicator>
|
|
format-prefix =
|
|
|
|
; Available tokens:
|
|
; %layout%
|
|
; %name%
|
|
; %number%
|
|
; Default: %layout%
|
|
label-layout = " %layout%"
|
|
|
|
; Available tokens:
|
|
; %name%
|
|
; Default: %name%
|
|
label-indicator-on = %name%
|
|
label-indicator-on-foreground = ${color.primary}
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/title]
|
|
type = internal/xwindow
|
|
|
|
; Available tags:
|
|
; <label> (default)
|
|
format = <label>
|
|
format-prefix =
|
|
|
|
; Available tokens:
|
|
; %title%
|
|
; Default: %title%
|
|
label = " %title%"
|
|
label-maxlen = 30
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|
|
|
|
[module/workspaces]
|
|
type = internal/xworkspaces
|
|
|
|
; Only show workspaces defined on the same output as the bar
|
|
;
|
|
; Useful if you want to show monitor specific workspaces
|
|
; on different bars
|
|
;
|
|
; Default: false
|
|
pin-workspaces = true
|
|
|
|
; Create click handler used to focus desktop
|
|
; Default: true
|
|
enable-click = true
|
|
|
|
; Create scroll handlers used to cycle desktops
|
|
; Default: true
|
|
enable-scroll = true
|
|
|
|
; icon-[0-9]+ = <desktop-name>;<icon>
|
|
; NOTE: The desktop name needs to match the name configured by the WM
|
|
; You can get a list of the defined desktops using:
|
|
; $ xprop -root _NET_DESKTOP_NAMES
|
|
|
|
; Emacs, Calendar, News (General)
|
|
icon-0 = 1;
|
|
; Terminal, Emacs (IDE)
|
|
icon-1 = 2;
|
|
; Slack, Dev Tools Browser
|
|
icon-2 = 3;
|
|
; Chat, News (Financial)
|
|
icon-3 = 4;
|
|
; Apple Music, Media
|
|
icon-4 = 5;
|
|
; Monitoring, Emacs (Journal)
|
|
icon-5 = 6;
|
|
icon-default =
|
|
|
|
; Available tags:
|
|
; <label-monitor>
|
|
; <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
|
|
; Default: <label-state>
|
|
format = <label-state>
|
|
format-padding = 0
|
|
|
|
; Available tokens:
|
|
; %name%
|
|
; Default: %name%
|
|
label-monitor = %name%
|
|
|
|
; Available tokens:
|
|
; %name%
|
|
; %icon%
|
|
; %index%
|
|
; Default: %icon% %name%
|
|
label-active = %icon%
|
|
label-active-foreground = ${color.primary}
|
|
label-active-overline = ${color.primary}
|
|
|
|
; Available tokens:
|
|
; %name%
|
|
; %icon%
|
|
; %index%
|
|
; Default: %icon% %name%
|
|
label-occupied = %icon%
|
|
label-occupied-foreground = ${color.alternate}
|
|
|
|
; Available tokens:
|
|
; %name%
|
|
; %icon%
|
|
; %index%
|
|
; Default: %icon% %name%
|
|
label-urgent = %icon%
|
|
label-urgent-foreground = ${color.secondary}
|
|
|
|
; Available tokens:
|
|
; %name%
|
|
; %icon%
|
|
; %index%
|
|
; Default: %icon% %name%
|
|
label-empty = %icon%
|
|
|
|
label-active-padding = 2
|
|
label-urgent-padding = 2
|
|
label-occupied-padding = 2
|
|
label-empty-padding = 2
|
|
|
|
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
|